780433
12
Zoom out
Zoom in
Previous page
1/89
Next page
11
3. Adjusting the Bicycle to the Rider
Your body height and proportions are decisive for the frame size of your
bicycle. Make particularly sure there is enough space between your
crotch and the top tube so that you do not hurt yourself, if you have to
get off your bicycle quickly.
By choosing a specific type of bike you already roughly determine the
posture you will be riding in. However, some components of your bicycle
are designed in a way that you can adjust them to your proportions up to
a certain degree. These include the seat post, the handlebars, the stem
and the brake levers.
After any assembly work, be sure to make a short functional check as
described in chapter “Before Every Ride” and do a test ride in an area
free of traffic. This will allow you to safely check whether everything
is in good order.
If you are unsure about how to do something, it will be better just to
check your seating position. Ask a specialist if you want something
changed. They will see to your wishes the next time you leave your bicy-
cle at the workshop, e.g. for the first inspection.
3.1. Adjusting the Saddle Height
The saddle should be set to a height which gives maximum pedalling
comfort and efficiency. When pedalling, the ball of your big toe should
be positioned above the centre of the pedal spindle. With your feet in
this position you should not be able to stretch your legs completely
straight at the lowest point. If the saddle is too high, you will have trou-
ble passing through the lowest point and your pedalling will become
awkward. You can check the height of your saddle in the following,
simple way. To do so be sure to wear flat-soled shoes, or even better
cycling shoes.
Sit on the saddle and put one of your heels on the pedal at its lowest
point. In this position your leg should be fully stretched. Make sure
your hips remain horizontal.
To adjust the saddle height loosen the binder bolt or quick-release
lever (inform yourself beforehand on how to use quick-releases in
chapter “Wheel Fastening with Axle-Nuts, Quick-Releases or Thru
Axles). Use a suitable tool to release the seat post binder bolt by
turning it anticlockwise.
Rule of thumb to determine the suitable saddle height (SH):
SH = Inseam (length of inside leg, barefoot) x 0.885
The saddle height is the distance from the centre of the bottom bracket
to the upper edge of the saddle.
Adjusting the Bicycle to the Rider
Danger:
Never grease a carbon seat
post or the seat tube of a
carbon frame. This would
reduce the friction and
render any clamping with
acceptable clamping forces
impossible. Use special
carbon assembly paste to
increase the clamping force.
Danger:
If you have a very small
frame, there may be the
danger of your foot colliding
with the front wheel. There-
fore, make sure your cleats
are properly adjusted.
Danger: All the tasks described require experience,
appropriate tools and manual skills. Make it a rule
to tighten the bolted connections carefully by using a torque wrench.
Increase the torque values bit by bit, checking the fit of the component
in between. Do not exceed the maximum torque values! You will find the
values in chapter “Recommended Torque Settings” and in the operating
instructions of the component manufacturers on the enclosed STEVENS
CD-ROM.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stevens MTB 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stevens MTB 2014 in the language / languages: English as an attachment in your email.

The manual is 11.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stevens MTB 2014

Stevens MTB 2014 User Manual - German - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info