780330
25
Zoom out
Zoom in
Previous page
1/28
Next page
Recommended Torque Settings
All bolted connections of the bicycle components have to be tightened carefully and checked regularly to ensure
the safe and reliable operation of the STEVENS bicycle. This is best done with a torque wrench that disengages at
the desired torque value or a click-type torque wrench. Tighten carefully by approaching the prescribed maximum
torque value in small steps (0.5 Nm increments) and check in between the proper fit of the component. Never
exceed the maximum torque value indicated by the manufacturer!
Where no maximum torque setting is given start with 2 Nm. Observe the indicated values and observe the values
on the components and/or in the operating instructions of the component manufacturers on the enclosed CD-ROM.
Component Bolted connections Shimano1 (Nm) SRAM/Avid2 (Nm) Tektro3 (Nm) TRP4 (Nm)
Rear
derailleur
Mount (on frame/derailleur hanger) 8 - 10 8 - 10
Cable clamp 5 - 7 4 - 5
Pulley wheels 3 - 4
Front
derailleur
Mount on frame 5 - 7 5 - 7
Cable clamp 5 - 7 5
Shift levers Mount on handlebars 5 2.5 - 4
Hole covering 0.3 - 0.5
Brake lever
unit
Mount on handlebars 6 - 8 5 - 7 6 - 8
Time trial brake lever 5 - 7
Hub Quick-release lever 5 - 7.5
Locknut for bearing adjustment of
quick-release hubs
10 - 25
Sprocket cluster lock ring 29 - 49 40
Internal gear
hub
Hub axle nut 30 - 45
Crank Crank mount (grease-free square-head) 35 - 50
Crank mount (Shimano Octalink) 35 - 50
Crank mount (Shimano Hollowtech II) 12 - 15
Crank mount (Isis) 31 - 34
Chainring mount 8 - 11 12 - 14 (steel)
8 - 9 (alu)
Sealed
cartridge
bearing
Shell (square-head) 49 - 69
Shell (Shimano Hollowtech II, SRAM
Gigapipe)
35 - 50 34 - 41
Octalink 50 - 70
Pedal Pedal axle 35
Shoe Cleat 5 - 6
Spike 4
Brake
(V-brake)
Cable clamp 6 - 8 6 - 8 6 - 8 6 - 8
Brake shoe mount 6 - 8 6 - 8 6 - 8 6 - 8
Brake pad fixing 1 - 2
Brake boss frame/fork 8 - 10
1 si.shimano.com 2 sram.com 3 tektro.com 4 trpbrakes.com
Note:
Due to the unmanageable number of components on the market, STEVENS is not in a position to foresee
every product that will be replaced or newly assembled by third parties. Therefore STEVENS denies any
liability for such kind of additions or modifications with regard to compatibility, torque values etc. Whoever
assembles or modifies the bicycle shall ensure that the bicycle was assembled according to the state-of-
the-art in science and technology.
Note:
Some components have the maximum permissible torque values printed on them. Use a torque wrench
and never exceed the maximum torque values! If you are in doubt or if you have any questions, contact
your STEVENS dealer.
Recommended Torque Settings for Disc Brakes and Hydraulic Rim Brakes
Component Shimano1
(Nm)
Avid2
(Nm)
Tektro3
(Nm)
TRP4
(Nm)
Magura HS5
(Nm)
Brake calliper mount on frame/fork 6 - 8 9 - 10 (IS adapter) 6 - 8 6 - 8 6
8 - 10 (brake calliper)
Brake lever unit on handlebars
- Single-bolt clamp
- Two-bolt clamp
6 - 8 5 - 7 4
7 (Carbon)
Union screws of cable at grip
and normal cable at brake calliper
5 - 7 5 4
Brake cable connector at
brake calliper (disc tube cable)
5 - 7
Expansion tank cap 0.3 - 0.5
Bleeding device brake calliper 4 - 6 4 - 6
Bleeding device brake lever 2 - 4
Brake rotor fixing (6-holes) 4 6.2 4 - 6 6 - 8
Brake rotor fixing (centerlock) 40
Hose (union nut) direct connection 5 - 7 5 - 7
Slave cylinder (bleeder screw) 4 - 6 4 - 6
Hose (union nut) direct connection 4
Slave cylinder (bleeder screw) 4
Brake pad retainer at brake calliper 3 - 5
Cable clamp at brake calliper 4 - 6
1 si.shimano.com 2 sram.com 3 tektro.com 4 trpbrakes.com 5 magura.com
These values are reference values of the above-mentioned component manufacturers. Observe the values
in the instructions of the component manufacturers on the enclosed CD-ROM. You find more information at
www.stevensbikes.de
These values do not apply to the components of other manufacturers.
S - 48 | English English | S - 49
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stevens MTB - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stevens MTB - 2020 in the language / languages: English as an attachment in your email.

The manual is 8.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stevens MTB - 2020

Stevens MTB - 2020 User Manual - German - 28 pages

Stevens MTB - 2020 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info