682525
37
Zoom out
Zoom in
Previous page
1/52
Next page
37
Sterling Elite2 XS-RS-Plus
8.1 ELITE2 PLUS DISPLAY
(Fig.8.1.0).
Always consult your Sunrise Medical authorised dealer
when a diagnostic fault has appeared on your scooter
display.
Elite2 PLUS Fault- The battery gauge shows the status of
the control system, and the fault graphic ! on the display.
Battery Gauge is steady
This indicates that everything is OK.
Battery Gauge flashes slowly
The control system is functioning correctly but the
batteries need charging as soon as possible.
Battery Gauge steps up
The scooter batteries are being charged. You will not be
able to drive the scooter until the charger is disconnected
and you have switched the control system off and on
again.
Battery Gauge flashes rapidly
The control system safety circuits have operated and the
control system has been prevented from moving the
scooter.
This indicates a system trip. i.e. the power module has
detected a problem somewhere in the scooters electrical
system.
Switch the scooter off.
Check that none of the plugs and sockets have become
loose or disconnected.
Check the condition of the battery.
If you can’t find the problem, try the self help guide on the
next page.
Switch the scooter on again and try to drive the scooter.
If the safety circuits operate again, switch off and do not
try to use the scooter.
Contact your Sunrise Medical authorised dealer.
8.0 Troubleshooting Using the LCD
Fig.8.1.0
8.2 ELITE2 XS, RS DISPLAY
Always consult your Sunrise Medical authorised dealer
when a diagnostic fault has appeared on your scooter
display
Elite2 XS,RS Fault- The LCD displays the fault bar
number, (Fig.8.2.0).
Incase of a brake fault (4 bar) the display will show,
“brake” and the horn will sound, (Fig.8.2.1).
The displays above indicate the control system safety
circuits have operated and the control system has been
prevented from moving the scooter.
This indicates a system trip. i.e. the power module has
detected a problem somewhere in the scooters electrical
system.
Switch the scooter off.
Check that none of the plugs and sockets have become
loose or disconnected.
Check the condition of the battery.
If you can’t find the problem, try the self help guide on the
next page.
Switch the scooter on again and try to drive the scooter.
If the safety circuits operate again, switch off and do not
try to use the scooter.
Contact your Sunrise Medical authorised dealer.
NOTE: Taking the scooter from a warm indoor
environment to very cold outside surroundings may cause
the display to mist for a short time. This is harmless and
will clear quickly.
Fig.8.2.0
Fig.8.2.1
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sterling Elite 2 XS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sterling Elite 2 XS in the language / languages: English as an attachment in your email.

The manual is 3.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sterling Elite 2 XS

Sterling Elite 2 XS User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info