643153
8
Zoom out
Zoom in
Previous page
1/56
Next page
– 14 – – 15 –
GB
XLEDHome 2 XLEDHome 2 XL
Dimensions (H×W×D) 194×180×161 212×180×161
Output 14.8 W / 80 lm/W 20 W / 80 lm/W
Luminous flux / brightness 1184 lm 1608 lm
Weight 0.575 kg 0.620 kg
Area illuminated Front view 283.1 cm2
Side view 113 cm2
Front view 316.2 cm2
Side view 115 cm2
Mains current 75mA 97mA
Power factor 0.84 0.86
Additional switching capacity max. 1000 W (resistive load, e.g. light bulbs)
max. 500 W (uncorrected, inductive, cos ϕ = 0.5,
e.g. fluorescent lamps)
max. 4 × 56 W / C ≤ 88 F
Eciency 80 lm/W
Colour temperature 4000 K (neutral white)
Colour rendering index Ra ≥ 80
Supply voltage 230-240 ~V / 50/60 Hz
Sensor system Passive infrared
Reach max. 14 m
Angle of coverage 140°
Time setting 8 s - 35 min
Twilight setting 2 - 2000 lux
IP / protection class IP44 / II
8. Warranty
This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
Steinel guarantees that it is in perfect condition
and proper working order. The warranty period is
5 years and starts on the date of sale to the con-
sumer. We will remedy defects caused by material
flaws or manufacturing faults. The warranty will be
met by repair or replacement of defective parts at
our own discretion. The warranty shall not cover
damage to wear parts, damage or defects caused
by improper treatment or maintenance. Further
consequential damage to other objects shall be
excluded. Claims under the warranty will only be
accepted if the unit is sent fully assembled and
well-packed with a brief description of the fault, a
receipt or invoice (date of purchase and dealer's
stamp) to the appropriate Service Centre.
Service:
Our Customer Service Department will repair faults
not covered by warranty or after the warranty pe-
riod. Please send the product well-packed to your
nearest Service Centre.
9. Technical specifications
Malfunction Cause Remedy
Sensor-switched LED floodlight
without power
n Fuse faulty, not switched ON,
break in wiring
n Short circuit
n Replace fuse, turn ON mains
switch, check lead with voltage
tester
n Check connections
Sensor-switched LED floodlight
will not switch ON
n Twilight setting in night mode
during daytime operation
n Mains power switch OFF
n Fuse faulty
n Detection zone not properly
targeted
n Readjust
n Switch ON
n Fit new fuse, check connec-
tion if necessary
n Readjust
Sensor-switched LED floodlight
will not switch OFF
n Continuous movement in the
detection zone
n Check zone and readjust if
necessary or apply shroud
Sensor-switched LED floodlight
keeps switching ON and OFF
n Animals moving in the detec-
tion zone
n Tilt sensor higher or apply
specific shrouds; adjust
detection zone or fit shrouds
Sensor-switched LED floodlight
switches ON when it should not
n Wind is moving trees and
bushes in the detection zone
n Cars on the road are being
detected
n Sudden change in tempera-
ture caused by weather (wind,
rain, snow) or air discharged
from fans, open windows
n Sensor-switched LED flood-
light swaying (moving),
resulting, for example, from
gusts of wind or heavy
precipitation
n Change detection zone
n Change detection zone
n Change detection zone,
mount in a dierent place
n Fit sensor-switched LED flood-
light to a firm surface
10. Troubleshooting
GB
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel XLED home 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel XLED home 2 in the language / languages: All languages as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Steinel XLED home 2

Steinel XLED home 2 User Manual - English, German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info