Manual Steinel L 835 SC (page 18 of 155) (All languages)

758078

Zoom out

Zoom in

1/155

- 35 -- 34 -

A microprocessor then issues the switch command "switch light ON". Detection

is possible through doors, panes of glass or thin walls. Analysing the signal,

the sensor distinguishes between moving persons and moving objects, such

as bushes or small animals. This rules out any inadvertent triggering by small

animals as well as interference from extreme temperatures.

The functions of the sensor-switched light can be set via smartphone and

tablet or control dial. Bluetooth interconnection is only possible via smartphone

or tablet.

Note: The high-frequency output of the iHF-sensor is approx. 1 mW – that's

1000 times less than the transmission power of a mobile phone or the output

of a microwave oven.

Package contents L 830, L 835, L 840SC/C(Fig.3.1)

– Luminaire

– Three screws

– Three wall plugs

– Three spacers

Product dimensions L 830SC/C(Fig.3.2)

Product dimensions L 835SC/C(Fig.3.3)

Product dimensions L 840SC/C(Fig.3.4)

Product components L 830, L 835, L 840SC/C(Fig.3.5)

A Wall mount

B Connecting terminal

C Sealing plug

D Plug connection

E Light cube

Package contents GL 80SC/C(Fig.3.6)

– Luminaire

– Proﬁle

– Base plate

– Four ﬂoor/ground screws

– Four wall plugs

– Four connecting screws

Product dimensions GL 80SC/C(Fig.3.7)

Product components GL 80SC/C(Fig.3.8)

A Cover cap

B Connecting terminal

D Plug connection

E Light cube

F Earth terminal

Luminous intensity distribution (Fig.3.9/3.10/3.11/3.12)

Reach (SC only) (Fig.3.13)

Note: If lights are mounted too close together, switching errors may occur as

the high-frequency signals emitted will interfere with each other. (Fig.3.14A)

The following measures will help to avoid switching errors of this kind:

• Allow a distance of at least 5 m between lights.

• Interconnect lights via the Smart Remote app and selectively deactivate the

sensor in individual lights via the Sensor-O function (Fig.3.14B + C). As

a result of interconnection, movement will also switch lights ON in spite of

their sensor being deactivated.

4. Electrical connection

Wiring diagram (Fig.4.1)

The mains supply lead is a 2 to 3-core cable:

L = phase conductor (usually black or brown)

N = neutral conductor (usually blue)

PE = protective-earth conductor (green/yellow)

If you are in any doubt, identify the conductors using a voltage tester; then

disconnect from the power supply again. Connect phase (L) and neutral con-

ductor (N) to the terminal. Insulate protective-earth conductor (PE) and place it

next to terminal block.

For GL 80SC/C, the protective-earth conductor must be connected to the

earth terminal (PE).

Important: Incorrectly wired connections will produce a short circuit later on

in the product or your fuse box. In this case, you must identify the individual ca-

bles and re-connect them. A mains power switch for turning the light ON and

OFF may of course be installed in the mains supply lead.

Important: The light source of this luminaire cannot be replaced. If the light

source needs to be replaced (e.g.at the end of its service life), the complete

luminaire must be replaced.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steinel L 835 SC in the language / languages: All languages as an attachment in your email.

The manual is 6,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steinel L 835 SC Manual

Product: