593148
10
Zoom out
Zoom in
Previous page
1/42
Next page
Dimensions (H x W x D): 90 x 60 x 100 mm
Output: max. 2000 W (ohmic load, e.g. filament bulb)
max. 1000 W (uncorrected, inductive,
cos φ = 0,5, e.g. fluorescent lamps)
max. 1800 W (series corrected)
max. 500 W (parallel corrected with C = 45.6 µF)
max. 1000 W (electronic ballast, capacitive,
e.g. energy-saving lamps,
max. 12 items)
Connection: 230 – 240 V, 50 Hz
Angle of coverage: 300° with 180° angle of aperture
Pivoting range of the sensor: Fine adjustment ± 80°
Reach: max. 12 m (electronically stabilised)
Time setting: 10 sec. – 15 min.
Twilight setting: 2–2000 lux
Type of enclosure: IP 54
Technical specifications
Declaration of conformity
This product complies with
the European Directive on
Low-Voltage Appliances,
73/23/EEC and the EMC
Directive 89/336/EEC.
Functional Warranty
This STEINEL product has
been manufactured with great
care, and its operation and
safety have been tested in
conformity with the current
regulations. Production is
also submitted to final ran-
dom-sample testing.
STEINEL undertakes the
guarantee for perfect condi-
tion and function.
The warranty period is
36 months, starting on the
date of sale to the user. We
undertake to remedy faults
caused by material or manu-
facturing defects. This war-
ranty undertaking shall be
performed by the repair or re-
placement of the defective
parts, at our own discretion.
This warranty shall not cover
damage to wearing parts or
damage and faults caused by
incorrect operation or main-
tenance. Breakage due to a
fall is also not covered.
Further consequential dam-
age to external items is ex-
cluded.
Claims under warranty shall
only be accepted if the prod-
uct is sent fully assembled
and well packed complete
with sales slip or invoice
(date of purchase and deal-
er's stamp) to the appropriate
Service Centre or handed in
to the dealer within the first
6 months.
Repair Service:
Our Customer Service De-
partment will repair faults not
covered by warranty or after
the warranty period. Please
send the product well packed
to your nearest Service
Centre.
Troubleshooting
Malfunction Cause Remedy
IS 300 without power
Fuse has blown; not
switched ON
Short circuit
Replace fuse, switch on
mains switch, check wiring
with voltage tester
Check connections
IS 300 does not switch ON
Twilight setting in
nighttime mode during
daytime operation
Bulb burnt out
Mains switch OFF
Fuse blown
Detection zone not
correctly adjusted
Readjust
Replace light bulb
Switch power on
Replace fuse, check
connection if necessary
Readjust
IS 300 does not switch OFF
Continued movement
within the detection zone
Switched on light is within
detection zone and
switches on again as a
result of temperature
change
Set to continuous
operation by indoor series
switch
Check zone and readjust if
necessary or apply shroud
Readjust zone or apply
shroud
Series switch to automatic
IS 300 keeps switching
ON/OFF
Switched on light is within
detection zone
Animals moving in
detection zone
Adjust detection zone or
apply shrouds, increase
distance
Adjust detection zone or
apply shrouds
IS 300 switches on when it
should not
Wind is moving trees and
bushes in the detection
zone
Cars in the street are
detected
Sudden temperature
changes due to weather
(wind, rain, snow) or
exhaust air from fans or
open windows
Adjust detection zone or
apply shrouds
Adjust detection zone or
apply shrouds
Adjust detection zone or
install in a different place
1918
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel IS 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel IS 300 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info