593376

Steinel HG 2300 E Manual

6
Zoom out
Zoom in
Previous page
1/37
Next page
Safety instructions
Caution: When using electric
power tools, observe the fol-
lowing basic safety precau-
tions to avoid electric shock
as well as the risk of injury
and fire. Read and observe
this information before using
the tool.
Fire may be caused if
the tool is not used with
care.
Take the ambient
conditions into account.
– Do not expose power tools
to rain.
– Do not use power tools
when they are damp or in
damp or wet surroundings.
– Exercise care when using
the tool in the proximity of
combustible materials. Do
not direct the tool at one
and the same place for a
prolonged period.
– Do not use in the
presence of an explosive
atmosphere.
– Heat may be conducted to
combustible materials that
are out of sight.
Protect yourself from
electric shock.
– Avoid touching earthed
equipment, such as pip-
ing, radiators, cookers,
refrigerators.
Do not leave the tool
unattended when in
operation.
Store your tools in a
safe place.
– After use set the tool
down on its knock guard
and allow it to cool before
packing it away.
– When not in use, tools
should be stored in a dry,
locked room out of reach
of children.
Do not overload your
tools.
– Your work results and
safety will be enhanced if
you operate the tool within
the specified output range.
– After using the tool for a
prolonged period at
600° C, you should reduce
the temperature before
switching it of f. This will
prolong the service life of
the heating element.
Beware of toxic gases
and ignition hazards.
– Toxic gases may occur
when working on plastics,
paints, varnishes or similar
materials. Beware of fire
and ignition hazards.
Do not misuse the
power cord.
– Do not carry the tool by
the power cord and do not
use it to pull the plug from
the power outlet socket.
Protect the power cord
from heat, oil and sharp
edges.
Caution
– For your own safety, only
use the accessories and
attachments that are given
in the Operating Instruc-
tions or recommended or
specified by the tool manu-
facturer. Using attach-
ments or accessories
other than those recom-
mended in the Operating
Instructions or catalogue
may result in personal
injury.
Repairs only by qualified
electricians.
– This power tool complies
with the relevant safety
regulations. Repairs
should only be performed
by a qualified electrician.
Otherwise the user may
run the risk of accidents.
Failure to observe the
Operating Instructions
may turn the tool into a
source of danger.
Keep these safety
warnings in a safe place.
11
Operating instructions
Hot air gun – Specifications
Fully electronic temperature and airflow control
Airflow and temperature continuously variable
Heating element easy to change
Brushless motor for long service life
Barrel shape for optimum and mechanical application
Sturdy casing
Power cord can be changed without opening casing
10
System components
Components
Outlet tube
Heating element
Guard sleeve
Knock guard
Temperature switch
Airflow and mains power switch
Voltage: 230 V/50 Hz 230 V/50 Hz
Output: 2300 W 2300 W
Temperature: 50–600°C, 50–600°C,
continuously variable continuously variable
Airflow regulation: continuously variable continuously variable
Max. airflow rate: 600 l/min. 600 l/min.
Air pressure: 3000 Pa 3000 Pa
Outlet tube: Suitable for screw-on Suitable for
“Professional“ nozzles “Standard“ nozzles
(30 mm dia.) (34 mm dia.)
Motor life: approx. 5,000 hours approx. 5,000 hours
Heating element life: approx. 800 hours approx. 800 hours
Power cord: H07 RN-F 2 x 1 H07 RN-F 2 x 1
Length: 2.5 m Length: 2.5 m
W eight (without power cord): 850 g 850 g
Dimensions: Length: 375 mm Length: 355 mm
Ø 100 mm Ø 100 mm
(at knock guard ) (at knock guard )
Technical specifications
HG 2300 EHG 2300 EM
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel HG 2300 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel HG 2300 E in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info