593165
12
Zoom out
Zoom in
Previous page
1/75
Next page
- 22 - - 23 -
Technical SpecificationsElectrical installation/Automatic mode
In selecting the wiring leads, it is
important to meet the wiring
regulations laid down in VDE 0100
(see Safety warnings on page 19).
The following applies to wiring
presence detectors: According to
section 6 of VDE 0100 520, a multi-
ple-core lead containing both the
mains voltage leads and the con-
trol leads (e.g. NYM 5 x 1.52) may
be used for wiring between the
sensor and electronic ballast. The
mains connection lead must be no
greater than 10 mm in diameter.
The clamping range of the mains
terminal is designed for a maxi-
mum of 2 x 1.5 mm
2
or 1 x 2.5 mm
2
.
PSN
LL'
L
N
P
L
N
COM1
PSN
LL'
L
N
L
N
1-10V
1-10V
+
max. 100 mA
DIM
DIMCOM 1 COM 2
COM 1 AP
GB
Dimensions
(w x h x d)
HF 360
120 x 120 x 56 mm
Dual HF
120 x 120 x 76 mm
Supply voltage 230 – 240 V, 50 Hz / 60 Hz
Capacity, switching output 1
(COM 1/COM 2)
Relay 230 V
Resistive load 2000 W max. (cos ϕ = 1)
1000 VA max. (cos ϕ = 0,5)
Electronic ballast:
(COM 1/COM 1 AP/
COM 2/DIM)
Max. 'ON' current 800 A/200 μs
30 x (1 x 18 W), 25 x (2 x 18 W)
25 x (1 x 36 W), 15 x (2 x 36 W)
20 x (1 x 58 W), 10 x (2 x 58 W)
Pay attention to specific 'ON' currents of electronic ballasts!
A relay or contactor must be provided on line side for higher switching
capacities.
Capacity, switching output 2
(COM 2 only) (HF 360 only)
Presence
230 W max. / 230 V
1A max. (cos ϕ = 1) for HVAC (heating/ventilation/air-conditioning)
Application indoors
Mounting height
(mounted to ceiling)
2.5 m – 3.5 m ceiling height
Detection angle HF 360
360° with 140° aperture angle
also through glass, wood and
stud walls. 1 or 2 detection direc-
tions can be masked out for ad-
justment to the room situation.
Dual HF
see diagrams on p. 21
also through glass, wood and stud
walls
Reach HF 360
8 m max. all round,
electronically and infinitely
variable
Dual HF
10 x 3 m max. in each direction,
electronically and infinitely
adjustable
Switching output 1
Time setting
30 sec. – 30 min., pulse mode (approx. 2 sec.)
IQ mode (automatic adjustment to use profile)
Switching output 2
Time setting
(HF 360 only)
COM2 only for HVAC
0 sec. – 10 min. switch-'ON' delay
1 min. – 2 h stay-'ON' time
Automatic room surveillance
DIM:
Time setting
30 sec. - 30 min.
IQ mode (automatic adjustment to use profile)
Control output
1 – 10 V / max. of 50 electronic ballasts, max. of 100 mA
Sensor system High-frequency 5.8 GHz, transmission power < 1mW
Function setting by
DIP switches
DIP 1 Normal / test mode
DIP 2 Semi- / fully automatic mode
DIP 3 Button / switch mode
DIP 4 'ON' button / 'ON'-'OFF' button
DIP 5 Constant-lighting control 'ON'-'OFF' (DIM)
Parallel connections Master/slave
Master/master
User-friendly setting capability Teach-in (with optional remote control RC3)
Light-level setting 10 – 1000 lux, ∞ / daylight
DIM 100 – 1000 lux
IP rating IP 20 (IP 54 with surface-mounted box)
Safety class II
Temperature range 0° to +40° C
Housing UV-resistant, paintable
PC PRO HF360_DualHF_Zentraleuropa.indd 22-23PC PRO HF360_DualHF_Zentraleuropa.indd 22-23 11.09.13 10:3811.09.13 10:38
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel HF 360 COM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel HF 360 COM in the language / languages: All languages as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info