Manual Steinel GL 80 SC (page 19 of 155) (All languages)

758082

Zoom out

Zoom in

1/155

- 36 - - 37 -

5. Mounting

• Check all components for damage.

• Do not use the product if it is damaged.

• When installing the sensor-switched light, make sure the installation site is

not exposed to vibration.

• Select an appropriate mounting location, taking the reach and motion

detection into consideration.

Mounting procedure (L 830, L 835, L 840SC/C)

• Switch OFF power supply. (Fig.4.1)

• Undo retaining screws and detach light cube from the wall mount. (Fig.5.1)

• Mark drill holes (Fig.5.2)

• Drill holes and ﬁt wall plugs. (Fig.5.3)

• Pierce sealing plug.

• Installation with concealed power supply lead (Fig.5.4)

• Installation with surface-mounted power supply lead (Fig.5.5)

• Connect conductors (Fig.5.6)

• Fit light cube onto wall mount (Fig.5.7)

• Screw in retaining screws (Fig.5.7)

• Switch ON power supply (Fig.5.7)

• Make settings via app (SC only)

➔ "6. Function"

Mounting procedure (GL 80SC/C)

• Switch OFF power supply (Fig.4.1)

• Undo retaining screw and remove light cube from the cover (Fig.5.8)

• Pull cable through base plate and proﬁle (Fig.5.9)

• Screw base plate to proﬁle (Fig.5.10)

• Mark base plate drill holes (Fig.5.11)

• Drill holes and insert screw anchors (Fig.5.12)

• Screw base plate to the ﬂoor/ground (Fig.5.13)

• Screw cover onto proﬁle (Fig.5.14)

• Connect conductors (Fig.5.15)

• Fit light cube to cover (Fig.5.16)

• Screw in retaining screw (Fig.5.16)

• Switch ON power supply (Fig.5.16)

• Make settings via app (SC only)

➔ "6. Function"

6. Function

The functions can be set for the SC types.

Functions are set via the Smart Remote app.

Smart Remote app

To conﬁgure the light via smartphone or tablet, you must download the

STEINEL Smart Remote app from your app store. You will need a Blue-

tooth-capable smartphone or tablet.

Android iOS

Functions that can be set via Smart Remote app are:

– Time setting

– Reach adjustment

– Twilight setting

– Night-light function

– Main light / night light level can be adjusted

– Extended reach adjustment

– Group interconnection

– Twilight setting by teach-in

Time setting (stay-ON time)

The light's ON time can be set to any period from approx. 5 seconds to a

maximum of 60minutes. Any movement detected before this time elapses will

restart the timer.

This function only ever applies to the C types in combination with a

Bluetooth sensor-switched product.

Note:

After the light switches OFF, it takes approx. 1 second before it is able to start

detecting movement again. The light will only switch ON in response to

movement once this period has elapsed.

The shortest time setting is recommended when adjusting the detection zone

and performing the functional test.

Reach setting (sensitivity)

Reach is the term used to describe the diameter of the more or less circular

detection zone produced on the ground after mounting the sensor-switched

light at a height of 2 m.

– Control dial set to maximum = max. reach (5 m)

– Control dial set to minimum = min. reach (1 m)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steinel GL 80 SC in the language / languages: All languages as an attachment in your email.

The manual is 6,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steinel GL 80 SC Manual

Product: