593155
13
Zoom out
Zoom in
Previous page
1/43
Next page
- 24 - - 25 -
DIP 6 / 7 / 8
Trigger mode
The trigger mode enables the user to choose which sensing technologies should be used
to initially turn the load on and which technologies are required to keep it on. The following
settings are possible:
DualTech COM1 / COM2 / DIM
Both: Requires movement recognition by PIR and US
Either: Requires movement recognition by PIR or US
PIR: Requires movement recognition by PIR
US: Requires movement recognition by US
Inital occupancy:
Sensor technology used to turn the load on (PIR, US, Both, Either)
Maintain Occupancy:
Sensor technology used to keep the load on after initial occupancy (PIR, US, Both, Either)
The trigger mode is selected by DIP switches 6, 7 and 8.
on
1 2 3 4 5 6 7 8
TEST
MODE
MANUAL
ON / OFF
CONST.
OFF
NORMAL
MODE
AUTO
ON
CONST.
ON
TRIGGER MODE
Trigger mode
options n
Initial presence
Maintain
presence:
DIP
6
DIP
7
DIP
8
Option 1 Both Either OFF OFF OFF
Option 2 Both Both OFF OFF ON
Option 3 PIR Either OFF ON OFF
Option 4 US Either OFF ON ON
Option 5 (factory setting) Either Either ON OFF OFF
Option 6 US US ON OFF ON
Option 7 PIR PIR ON ON OFF
Option 8 Either Both ON ON ON
Functions – Settings by potentiometer
Examples of use Light-level settings
Night-time mode min
Corridors, foyers 1
Stairs, escalators, moving walkways 2
Washrooms, toilets, switchrooms, canteens 3
Sales floor, kindergartens, nursery school rooms,
sports halls
4
Work rooms: offices, conference and meeting
rooms, precision assembly activities, kitchens
5
Working areas requiring good light:
Laboratory, technical drawing, precision work
>=6
Daylight mode max
Stay-ON time for switching
output 1
Setting 30 sec. – 30 min.
The chosen stay-ON time is in-
finitely variable from a minimum
of approx. 30 sec. to a maximum
of 30 min. Intrinsic light is cali-
brated after 3 min. When the
threshold is exceeded, the sensor
switches OFF after the stay-ON
time expires.
Time setting
If the dial is set to (fully an-
ti-clockwise), the unit is in pulse
mode, i.e. the output is switched
ON for approx. 2 sec. (e.g. for stair-
well lighting timer). Afterwards,
the sensor does not react to move-
ment for approx. 8 sec. Day mode
is the only mode possible here be-
cause of dazzle by light from exter-
nal sources.
Turned fully clockwise: The stay-
ON time is self-learning and ad-
justs dynamically to user behav-
iour.
The optimum time cycle is deter-
mined by means of a learning al-
gorithm.
The shortest time is 5 min., the
longest 20 min.
Pulse mode (except DIM)
IQ-Modus
The chosen response threshold
can be infinitely varied from ap-
prox. 10 – 1000 lux.
Control dial turned fully clockwise:
MAX daylight mode
Control dial turned fully
anti-clockwise: MIN night mode
Depending on the site of installa-
tion, the setting may need to be
corrected by 1-2 marks on the
scale.
Twilight setting
Potentiometer e
Potentiometer f
COM 1 + COM 2
Note: Depending on the site of installation, the setting may need to be corrected by 1 – 2 marks on the scale.
The light level is measured at the sensor.
GB
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel Dual US at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel Dual US in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info