Manual Steinel BHG 360 Li-Ion (page 5 of 8) (All languages)

593381

Zoom out

Zoom in

1/8

Anwendungen

Das Heißluftgebläse ist ideal zum Bearbeiten von kleineren Bau-

teilen und Schrumpfschläuchen. Besonders Elektroniker,

Modellbauer, KFZ-Werkstätten und Elektroinstallateure wissen es

zu schätzen. Hier nur einige von vielen Anwendungen:

■

Schrumpfen von Anschlusselementen für Kabel und

Leitungen.

■

Schrumpfen von wärmeschrumpfenden Produkten.

Schrumpfen

■

Ablösen von Aufklebern und Folien an Lackoberflächen und

glatten Oberflächen.

Ablösen von Selbstklebestreifen

■

Bearbeiten von Kunststoffteilen, z.B. im Modellbau.

Verformen

■

Löten von SMD-Bauteilen.

■

Reparatur- und Nacharbeiten an elektronischen SMD-

Baugruppen.

Löten / Entlöten

Zubehör

Reduzierdüse mit Schutzreflektor

Art.-Nr. 077358

Reflektordüse 40 mm

Art.-Nr. 077655

Reflektordüse 10 mm

Art.-Nr. 077556

Ihr Händler hält diese Düsen als Zubehör für Sie bereit.

Präzisionsreflektordüse

Art.-Nr. 077457

Funktionsgarantie

Dieses STEINEL-Produkt ist mit größter Sorgfalt hergestellt,

funktions- und sicher heitsgeprüft nach geltenden Vor schriften

und an schließend einer Stichproben kontrolle unterzogen.

STEINEL übernimmt die Garantie für einwandfreie Beschaffen-

heit und Funktion. Die Garantiefrist beträgt 12 Monate bzw.

500 Betriebsstunden und beginnt mit dem Tag des Verkaufs

an den Ver braucher. Wir beseitigen Mängel, die auf Material-

oder Fabrika tions fehlern beruhen, die Garantie leistung erfolgt

durch Instand setzung oder Austausch mange lhafter Teile nach

unserer Wahl. Eine Garantie leistung entfällt für Schä den an

Verschleiß teilen, für Schäden und Mängel, die durch unsachge-

mäße Behandlung oder Wartung auftreten, sowie für Bruch bei

Sturz. Weiter gehende Folge schäden an fremden Ge gen ständen

sind ausgeschlossen. Die Garantie wird nur gewährt, wenn das

unzerlegte Gerät mit Kassenbon oder Rech nung (Kauf datum

und Händler stempel), gut verpackt an die zu treffende Service-

station eingesandt oder in den ersten 6 Monaten dem Händ ler

übergeben wird. Reparatur service: Nach

Ablauf der Garantie zeit oder Mängel ohne

Garantie anspruch repariert unser Werk-

service. Bitte das Produkt gut verpackt

an die Servicestation senden.

CE Konformitätserklärung

Dieses Produkt erfüllt die Niederspannungrichtlinie 06/95/EG die

EMV-Richtlinie 04/108/EG und die RoHS-Richtlinie 02/95/EG.

Entsorgung

Werfen Sie Altgeräte, Akkus/Batterien nicht in den

Hausmüll, ins Feuer oder ins Wasser. Akkus/Batterien

sollen gesammelt, recycelt oder auf umweltfreundliche

Weise entsorgt werden.

Nur für EU-Länder:

Gemäß der Richtlinie RL 2006/66/EG müssen defekte oder

verbrauchte Akkus/Batterien recycelt werden. Nicht mehr ge-

brauchsfähige Akkus/Batterien können in der Verkaufsstelle oder

eine Schadstoffsammelstelle abgegeben werden.

- 8 - - 9 -

for choosing a STEINEL hot air tool. This tool can be used for

completing a wide range of jobs safely and reliably, such as

soldering, de-soldering, shrinking etc. All STEINEL tools

are manufactured to the highest standards and undergo a strict

process of quality control.

Used properly (please refer to the following safety precautions),

the tool will give you prolonged service and lasting satisfaction.

Thank you

Safety warnings

Stainless steel delivery nozzle

Air inlet with lattice guard keeps out smaller

particles of debris

Ergonomic soft-grip handle

OFF / COLD / HOT selector switch

LED light for illuminating area worked on

Hanging ring

Temperature indicator.

Lights up green as soon as the outlet nozzle delivers a

temperature of < 50 °C.

Reduction nozzle 7 mm

Button for releasing rechargeable battery

Charging station.*

LS - 36 V (type 0939)

Charging slot

Red LED charge indicator

Green LED charge indicator

36V rechargeable battery: STEINEL Li-Ion 10 IMR 18/65-2

(Type 0938)

Button for activating charge indicator

Temperature monitoring indicator

Battery charge status indicator

Tool features

* Some of the accessories illustrated or described are not included as standard.

Please read all of the safety precautions and instructions.

Failure to observe the safety precautions and instructions

may result in electric shock, fire and/or serious injuries. KEEP

THESE INSTRUCTIONS IN A SAFE PLACE TOGETHER WITH

THE TOOL.

When using electric power tools, observe the following basic

safety precautions to avoid electric shock as well as the risk of in-

jury and fire. Used carelessly, the tool can start an unintentional

fire or cause personal injury.

Check the tool for any damage (mains connection lead, housing

etc.) before putting it into operation and do not use the tool if it is

damaged.

Children should be supervised to make sure they do not play with

the tool.

Take ambient conditions

into account.

Do not expose electric power tools to rain.

Do not use electric power tools when they are damp or in a

damp or wet environment. Exercise care when using the tool in

the proximity of combustible materials. Do not direct hot air onto

the same spot for any prolonged period. Do not use in the pres-

ence of an explosive atmosphere.

Heat may be conducted to combustible materials that are out of

sight.

Protect yourself from

electric shock.

Avoid touching earthed objects, such as pipes, radiators,

cookers or refrigerators. Do not leave the tool unattended while

in operation.

Store your tools

in a safe place.

Place tool on stand after use and allow to cool before putting

it away.

When not in use, tools should be stored in a dry, locked room out

of children's reach. This tool is not intended for use by persons

(adults and children) with physical, sensory or mental impairments

or lacking experience and/or knowledge of use unless they are

supervised by a person responsible for their safety or have re-

ceived instructions from that person on how to use the tool.

Do not overload

your tools.

Your work results and safety will be enhanced if you operate the

tool inside the specified output range. After using the tool for a

prolonged period at maximum temperature, you should reduce

the temperature before switching the tool off. This will prolong the

life of the heating element. Do not carry the charging station by

the power cord and do not use it to pull the plug from the power

socket. Protect the power cord from heat, oil and sharp edges.

Beware of toxic gases and

fire hazards.

Toxic gases may occur when working on plastics, paints, varnish-

es or similar materials. Beware of fire and ignition hazards.

For your own safety, only use accessories and attachments that

are specified in the operating instructions or recommended or

specified by the tool manufacturer. Using attachments or acces-

sories other than those recommended in the operating instruc-

tions or catalogue may result in personal injury.

Repairs must only be carried out

by a qualified electrician.

This electric power tool complies with the relevant safety regula-

tions. Repairs must only be performed by a qualified electrician,

otherwise the user may run the risk of accidents. If this tool's

main power cord is damaged, it must be replaced by the manu-

facturer or its customer service department or a similarly qualified

person so as to avoid hazards.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steinel BHG 360 Li-Ion in the language / languages: All languages as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steinel BHG 360 Li-Ion Manual

Product: