593170
10
Zoom out
Zoom in
Previous page
1/124
Next page
- 9 -
Disconnect the power sup-
ply before attempting any
work on the sensor!
During installation, the
electric power cable to be
connected must be dead.
Therefore, switch 'OFF' the
power first and use a volt-
age tester to make sure
the wiring is off circuit.
Installing the sensor in-
volves work on the mains
power supply. This work
must therefore be carried
out professionally in
accordance with the
applicable national wiring
regulations and electrical
operating conditions (VDE
0100).
System Components
Load module
Catch mechanism
LED traffic light logic
Sensor module
5.1
Kaiser stud-wall junction
box, optional
5.2
Clamping-type ceiling
adapter, optional
Surface mounting adapter
Dip switches
(1) Acoustic warning signal
'ON' / 'OFF'
(2) LED 'ON' / 'OFF'
Sensor base
Installation / wiring
Installation/Wiring
The sensor is only intended
for concealed, indoor instal-
lation in ceilings (apart from
the COM 1 AP - surface-
mounted - option). A clamp-
ing-type ceiling adapter or
surface-mounting adapter is
not included. Sensor and
load module come ready as-
sembled and must be
plugged together after fitting
the load module and setting
the potentiometers/dip
switches. The sensor module
must now be locked in place
with the catch mechanism
, using a screwdriver if
necessary.
Installation site: Do not fit
the unit inside shelf units or
behind curtains and similar
covers so that the room's
normal convection air can
reach the air-quality sensor
without obstruction.
Draughts from windows and
doors as well as external
walls must be avoided.
Accessories:
Kaiser junction box for stud
walls
EAN No.: 4007841 000370
Clamping-type ceiling adapter
EAN No. 4007841 002855
Surface mounting adapter,
EAN No.: 4007841 000363
Operating Instructions
GB
Dear Customer,
Congratulations on purchas-
ing your new STEINEL sensor
and thank you for the confi-
dence you have shown in us.
You have chosen a high-
quality product that has been
manufactured, tested and
packed with the greatest care.
Please familiarise yourself with
these instructions before at-
tempting to install the product
because prolonged, reliable
and trouble-free operation will
only be ensured if it is fitted
and used properly.
We hope your new STEINEL
sensor will bring you lasting
pleasure.
Safety Precautions
GB
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel AC PRO Signal UP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel AC PRO Signal UP in the language / languages: All languages as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info