701005
84
Zoom out
Zoom in
Previous page
1/97
Next page
84
Setting up your system
Recording from a CD player
Most computers come with a CD-ROM drive that can also
be used as a regular CD player. In some cases the CD
player is internally connected to the audio hardware so
that you can record the output of the CD player directly
into Sequel (consult the audio hardware documentation if
you are uncertain).
All routing and level adjustments for recording from a CD (if
available) are done in the audio hardware setup application,
see below.
About recording levels and inputs
When you connect your equipment, you should make sure
that the impedance and levels of the audio sources and in-
puts are matched. Typically, different inputs may be de-
signed for use with microphones, consumer line level (-10
dBV) or professional line level (+4 dBV), or you may be
able to adjust input characteristics on the audio interface
or in its control panel. Please check the audio hardware
documentation for details.
Ö Using the correct types of input is important to avoid
distortion or noisy recordings.
Making settings for the audio hardware
Most audio cards come with one or more small applica-
tions that allow you to configure the inputs of the hard-
ware to your liking. This includes:
Selecting which inputs/outputs are active.
Setting up word clock synchronization (if available).
Setting levels for each input. This is very important!
Setting levels for the outputs, so that they match the equip-
ment you use for monitoring.
Selecting digital input and output formats.
Making settings for the audio buffers.
In many cases all available settings for the audio hardware
are gathered in a control panel, which can be opened from
within Sequel as described below (or opened separately,
when Sequel isn’t running). In some cases, there may be
several different applications and panels – please refer to
the audio hardware documentation for details.
Selecting a driver and making audio settings in Sequel
The first thing you need to do is select the correct driver in
Sequel to make sure that the program can communicate
with the audio hardware:
1. Launch Sequel.
2. Select the Program Settings page from the Multi
Zone.
The Audio Settings section of the Program Settings page.
3. Click in the Audio Connection field to open the driver
pop-up menu and select your audio hardware driver.
!
Sequel does not provide any input level adjustments
for the signals coming in to your audio hardware,
since these are handled differently for each card. Ad-
justing input levels is either done in a special applica-
tion included with the hardware or from its control
panel (see below).
!
Under Windows, we strongly recommend that you
access your hardware via an ASIO driver written
specifically for the hardware, if available. If no ASIO
driver is installed, we recommend that you check
with your audio hardware manufacturer if they have
an ASIO driver available, for example for download
via the Internet.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinberg Sequel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinberg Sequel in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info