651782

Steel Cucine PARTY Manual

88
Zoom out
Zoom in
Previous page
1/220
Next page
Instructions for the user
88
PROGRAMMING THE COOKING DURATION
This function is for programming the cooking duration after which the oven switches off
automatically.
Fig. 3
• Set the required cooking function and temperature using the control
knobs;
• press the key to enter the programming menu; the display will light up
as shown in Fig. 3;
• use the / keys to set the cooking duration; one press of key
adds one minute cooking time and every twelve minutes one internal
segment illuminates (Fig. 4). After 7 seconds the cooking programme
starts and the symbol appears.
At the end of the set cooking time, an audible alarm sounds for 7
minutes; the symbol and the numbers on the dial start to flash,
switching the oven off automatically;
• press any key to stop the alarm or the key to delete the programme.
Fig. 4
PROGRAMMING THE COOKING DURATION AND COOKING END
This function is for programming the oven to switch on at a set time and switch off
automatically after cooking.
Set the required cooking function and temperature using the control knobs.
In addition to the cooking duration, also set the time the oven is to switch on:
• press the key to enter the programming menu; the display will light up as shown in Fig. 3
and the symbol appears;
• use the / keys to set the cooking duration; one press of key adds one minute
cooking time and every twelve minutes one internal segment illuminates (Fig. 4);
• press the key again and use the / keys to set the cooking end time (cooking end time
minus cooking duration = cooking start time), the symbol appears.
After 7 seconds the display shows the current time while the cooking start time and the
cooking duration are shown with the illuminated internal segments, which remain steady
until cooking starts and flash for the duration of the cooking time.
At the set time, the oven switches on automatically; at the end of the set cooking time, an
audible alarm sounds for 7 minutes; the symbols and the numbers on the dial start to
flash, switching the oven off automatically;
• press any key to stop the alarm or the key to delete the programme.
Fig. 5 shows a programming example: the current time is 7:06 and cooking
is programmed to start at 8.00 and end at 9.00.
At 8:00, the internal segments between 8 and 9 will start to flash, while the
hour hand will remain still.
Fig. 5
… 88 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steel Cucine PARTY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steel Cucine PARTY in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info