Manual Steel Cucine PARTY (page 70 of 220) (English, German, French, Italian)

651782

Zoom out

Zoom in

1/220

Instructions for the installer

DIAGRAM “A” DIAGRAM “B”

CONNECTION TO THE TERMINAL BOARD

MODEL

POWER

CURRENT

DRAW (amps)

COOKER 5 BURNERS (1 OVEN) 2.9 12

COOKER 6 BURNERS (1 OVEN) 2.9 12

COOKER INDUCTION HOB (1 OVEN) (6 ELEMENTS) 10.1 42

COOKER 6 BURNERS (2 OVENS) 3.9 16

COOKER INDUCTION HOB (2 OVENS) (6 ELEMENTS) 11.1 42

3.5.3 Replacing the electric cable

To replace the electric cable, it is necessary to access the terminal board. It is located on the back

of the appliance as shown in the figure.

To replace the cable, proceed as follows:

• open the terminal board box;

• unscrew the screw A that locks the cable;

• loosen the screw contacts and replace the cable

with one of the same length that corresponds to the

specifications in the table in section “3.5.1 Electric

power cable section”;

• the "yellow-green" earth wire must be connected to

the terminal and must be approximately 20 mm

longer than the line cables;

• the neutral "blue" wire must be connected to the

terminal marked with the letter N;

• the line wire must be connected to the terminal

marked with the letter L.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steel Cucine PARTY in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steel Cucine PARTY Manual

Product: