Manual Steel Cucine PARTY (page 66 of 220) (English, German, French, Italian)

651782

Zoom out

Zoom in

1/220

Instructions for the installer

3.1 General warnings

The following operations must be carried out by a qualified installing technician. The

installing technician is responsible for correctly installing the appliance according to

current safety standards. Before using the appliance, remove the protective plastic on the control

panel, stainless steel parts, etc...

This appliance shall be installed only by authorised personnel and in accordance with the

manufacturer’s installation instructions, local gas fitting regulations, municipal building

codes, water supply regulations, electrical wiring regulations, AS 5601/AG 601 - Gas

Installations and any other statutory regulations. Before using the appliance, remove the

protective plastic on the control panel, stainless steel parts, etc...

The manufacturer declines any responsibility for damage incurred by persons, animals or

objects that is caused by not following the above guidelines (cfr. chapter “2. Warnings for

safety and use”).

The technical data is indicated on the plate located on the back of the appliance. The adjustment

conditions are shown on a label applied to the packing and the appliance.

Do not use the oven door handle

for lifting or handling, including while

unpacking the appliance.

3.2 Replacing the adjustable feet

The cooker comes with standard feet, already installed.

The standard feet allow you to adjust the height so that you can level the cooker to the floor; the

cooker becomes unstable if you unscrew them too much.

To raise the cooker, you should replace the standard feet with higher ones (supplied with some

models or ordered from your retailer) for an extra 3 cm.

Before turning the cooker over, we recommend removing all the parts that are not stably attached

to it, in particular the cooking hob grids and burners. To lighten the weight of the cooker, the

accessories inside the oven may also be removed, thereby preventing accidental damage during

the overturning operation.

Proceed in either of the following ways to

replace the feet:

A Lifting the cooker off the floor.

B Laying the cooker on its back.

Remove the feet from the packing

and screw

them to the bottom of the cooker.

Make the final adjustment

of the feet, to level

the cooker to the floor,

after completing the

gas and electrical connections.

Should you need to drag the equipment, tighten the feet all the way and then adjust them after

placing it where expected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steel Cucine PARTY in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steel Cucine PARTY Manual

Product: