754688
12
Zoom out
Zoom in
Previous page
1/15
Next page
12 760.180 | 17.10
ENGLISH
13 Defrosting
13.1 Freezer function
Over longer operating periods, a layer of frost and / or ice forms on the inner
walls. This increases the energy consumption. Regular defrosting should be done
for this reason.
Switch off the device for defrosting. Remove the fuse and disconnect the bat-
tery or pull the power plug.
Wrap the cooled / frozen goods in paper or blankets and store them in the
baskets in a cool place.
Remove the partition wall or freezer tray and place it underneath the device so that
the condensation water flows through the outflow opening and into the partition
wall or freezer tray. Pull the condensation water plug from the outflow opening.
Leave the cabinet lid open during the defrosting process. Mop up any remain-
ing condensation water with a cloth and clean the device.
CAUTION: Never use a mechanical device or any other artificial aid for defrost-
ing, other than those recommended by the manufacturer.
13.2 Refrigerator function
Depending on the humidity, water will condense on the interior container. The
condensed water must be drained periodically.
Remove the partition wall or freezer tray and place it underneath the device so that
the condensation water flows through the outflow opening and into the partition
wall or freezer tray. Pull the condensation water plug from the outflow opening.
Mop up any remaining condensation water with a cloth and clean the device.
NOTE
XDo not leave the condensation water plug removed permanently. Otherwise
humidity will flow into the device and will condense inside.
14 Cleaning
Always switch the device off before cleaning. Remove the fuse and disconnect
the battery or pull the power plug.
Clean the inner compartment, accessories, and outer walls with warm water
and a small amount of detergent. Never use cleaning agents containing sand or
acidic chemical solvents.
CAUTION
Danger of damage and personal injury.
XDo not use steam cleaning devices!
Ensure that no cleaning water penetrates into the electrical components or
the ventilation grill.
Thoroughly dry everything with a cloth.
The inlet and exhaust grills must be regularly cleaned. Dust deposits increase
the energy consumption. Ensure that no cables or other components are torn
off or damaged.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steca PF240-H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steca PF240-H in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Steca PF240-H

Steca PF240-H User Manual - German - 15 pages

Steca PF240-H User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info