Manual Steba ZP3 (page 12 of 36) (English, German, Dutch, Danish, French)

715240

Zoom out

Zoom in

1/36

Usage

∙ Wipe the appliance and the cones with a damp cloth. Take

care, that the appliance is not plugged in, as it could start

with a pressure on the juice cone.

∙ Place the carrier spindle on the motor part.

∙ Put the juice container on the motor base. The spout must be

placed at the opening.

∙ Put the sieve onto the juice container.

∙ Place the small juice cone onto the carrier spindle. For bigger

fruit, place the bigger juice cone on the small cone.

∙ The fruit shall be cut into halves.

∙ Put the fruit halves on the juice cone. By a slight pressure on

the lever-arm the juice cone rubs the juice out of the flesh. Do

not press too hard, in order not to scrape the white skin which

mostly tastes bitter.

∙ If you press too tight, the motor protection will react and the

device will stop. Continue working with light pressure.

∙ The juice is collected in the juice collector. When the spout is

moved downwards the juice will run out of the spout in a glass,

which must be placed beneath the spout before. Lift the spout

for collecting the juice again.

∙ It must be taken care, that the sieve gets not jammed.

∙ Never try to clean the sieve when the motor is running.

The juicer must be unplugged and the sieve should be

cleaned under running water.

∙ Citrus juice should be consumed quickly and stored in a metal

container.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba ZP3 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba ZP3 Manual

Product: