Manual Steba WK11 (page 13 of 36) (English, German, Dutch, Danish, French)

715064

Zoom out

Zoom in

1/36

Getting started

∙ Unwind the cable from the cable storage und plug it in.

∙ Open the lid, fill the device with water and close the lid.

∙

Do not fill the above the maximum marking on the water gauge because

hot water can escape.

∙ Place the container onto the base, the device beeps 2 times and the LED shines.

∙ Press the ON/OFF button, the red LED shines.

∙ The device starts with the 100°C mode and starts heating. Once the temperature is

reached, the device beeps twice and the red LED turns off.

∙ Setting the temperature:

o Choose the desired temperature 50, 70, 80, 90°C with the selection button.

A LED indicates the corresponding temperature.

o Press the OON/OFF button, the device starts heating.

o Once the temperature is reached the device beeps twice and the red LED

turns off.

∙ Keeping warm function:

o If the set temperature should be kept for 30 minutes, press the ON/OFF

button for 5 seconds during the setting process. The red and blue LED

shine. The devices turn off after 30 minutes.

Troubleshooting

Dear Client,

Thank you for buying this STEBA product. The following table will help you with pro-

blems that may occur when using your device. For many problems there is a simple

solution, because not everything that appears like a malfunction must be serious.

Please check the following list before contacting our customer service.

Problem Reason Solution

Control light does

not shine once de-

vice is plugged in

∙ No power

∙ To many devices at one

power cord

∙ Check is plug is plugged-in

correctly

∙ Check the fuse

Boiling result is bad ∙ Lid is not closed properly

∙ Heating plate is calcified

∙ Close the lid

∙ Decalcify the device

Device turns off ∙ Due to scale, heat accumu-

lates and triggers the mi-

croswitch

∙ Leave to cool for 10 min-

utes.

∙ Descale

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba WK11 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba WK11 Manual

Product: