715021
14
Zoom out
Zoom in
Previous page
1/40
Next page
14
2. Push the fan blade onto the motor shaft by aligning the slots on the base of the
fan blades with the shaft pin. Tighten the fan blades with the fan blade lock. This
lock must be tightened counterclockwise. Check that the fan blades rotate freely
by slightly turning them.
3. Open the securing clip and loosen the screw on the lower side of the front safety
guard. Position the front guard at the upper side of the rear guard. Press the front
guard onto the rear guard and close the securing clip. Tighten the crew.
Functions
ON/OFF
The device starts at low speed. The symbol I and
shine.
By pressing this button you can change the ventilation performance:
Level II – medium
Level III – fast
The device runs continuously.
Setting the time from 1 – 7 hours.
After the time run out, the device turns off.
Oscillation
Function mode
Uninterrupted service
Interval ventilation
This setting should simulate natural winds. The different wind flows
repeat every 60 seconds as long as the set time runs out.
Level I: low airflow
Level II: medium airflow
Level III: high airflow
Sleeping mode
The tilt angle can be adjusted.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba VT 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba VT 5 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info