Manual Steba VK 12 (page 18 of 40) (English, German, Dutch, French)

774545

Zoom out

Zoom in

1/40

Making bags from rolls of film

∙Determine the desired bag length.

∙Take the following into account:

∙About 2cm is required for the bottom of the bag for perfect sealing.

∙Then leave enough room for the food.

∙An additional 8cm is then required for vacuum sealing.

∙Cut the film using the film cutter by sliding it from right to left.

∙Place the front end of this tube of film against the black oval sealing lip, ensuring

that it is smooth and free of creases, and close the device.

∙Press the handle down.

∙To begin sealing, press the button 2) and the light will shine. When the light goes

off, the sealing process is complete.

∙The sealing jaw will be hot!

Vacuum Sealing

∙Do not seal spoiled food or flammable liquids.

∙Place the food in the bag. Ensure that the bag is not damaged by any sharp objects,

such as bones.

∙Insert the bag up to half down the vacuuming tray, ensuring that it is free

of creases, dry and free of residue.

∙Damp bags are difficult to weld. Press excess air out of the bag so the pump does

not pump unnecessarily.

∙Lock the lid by pressing down the handle.

∙Chose the desired welding time with button 5) and press 1) to start vacuuming.

∙Ensure that the vacuum pump does not suck up any liquids. If this occurs, press the

stop button immediately.

∙The aspiration and the welding stop automatically.

∙To remove the sealed bags, pull the handle up.

∙Do not seal twice in the same place, since this may cause the film to burn!

∙Allow the device to cool for one minute between sealing operations.

∙If the device becomes overloaded by continuous use, the overheating protection

will switch the device off. If this happens, disconnect the device from the power

supply and leave it to cool for about 20 minutes.

∙Vacuum sealing is not a substitute for deep freezing food.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba VK 12 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba VK 12 Manual

Product: