Manual Steba SV 80 (page 18 of 70) (English, German, Dutch, Danish, French, Swedish)

715258

Zoom out

Zoom in

1/70

Getting started

∙ The appliance is suitable for heating water only, everything else blocks the pump.

∙ Safely install the device into a pot. The pot must be as high that the device hangs

into the water up till the marking “max” and a distance of at least 1 cm to the

ground is kept in order not to block the water circulation.

∙ Please fill the pot with lukewarm water before use. Pay attention that the water,

together with the food, reaches the marking “max”.

∙ Plug in the device.

∙ If the water level is “min”, EE1 appears on the display and the device beeps three

times.

Setting the temperature and time

∙ Switch on the device. The symbol ON/OFF, the power control light and the tem-

perature indication light up in blue. The device is in stand-by mode.

∙ The operation of the touch screen works better with grease-free fingers.

∙ Pres the ON/OFF button once, the temperature indication lights in °C. Note: if the

ON/OFF button is pressed for more than 3 seconds, you can choose between °C

and °F.

∙ Use the +/- buttons to set the desired temperature in steps of 0,5°C up to 90°C.

∙ Press the setting button once. The timer indication is blinking. Use the +/- buttons

to set the desired hours in steps of 1 hour up to 99 hours. By pressing the setting

button again, the minutes can be set in steps of 1 minute up to 59 minutes.

∙ The program will be started by pressing the ON/OFF button, all LED’s of the display

are shining in blue.

∙ After reaching the selected temperature, the device beeps twice, the blue LED

flashes and the timer starts to count down.

∙ After the time has elapsed, the device beeps 3 times and the display shows “END”.

The power control light shines in red.

∙ Plug off the device.

∙ If you want to change the temperature or time during the cooking process, press

the ON/OFF button for 3 seconds. Then, temperature and time can be changed as

described above. Then, restart the device.

Water quantity

Do not put too much water in the device - leave sufficient room for the food. If neces-

sary, top up water until Max. The unit can be switched on only when the water level

reaches the max marking. The food must always be covered with water. The tempe-

rature sensor needs a couple of minutes until he adjusted to the set temperature if

pre-heated water is filled in. If there is no water in the pot, the device will not turn

on and beeps EE1. Turn off the appliance, add water and start again.

The water level sensor switches off the appliance when the water level drops

rapidly

If you plug the device out, or if you have a power outage, the unit remembers

the last set values.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba SV 80 in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba SV 80 Manual

Product: