Manual Steba MG 3000 PRO (page 14 of 52) (English, German, Dutch, Danish, French)

774578

Zoom out

Zoom in

1/52

∙Never use your fingers to push food into the feeding

tube!

∙Do not give bones, nuts or any other hard items into the device.

∙Do not let the device run longer than 5 minutes continuously.

Leave to cool for about 10 minutes.

Cleaning

∙Attention! Pull the plug before cleaning.

∙Never immerse the unit into water.

∙Food residues must be removed for reasons of hygiene.

∙Tip: Meat left behinds in the cutter housing may be removed

from the inside of the appliance by passing a slice of bread

through the cutter housing.

∙Remove the stodge and the filling tray. Press the release but-

ton and turn the whole cutter housing to the right in order to

remove it.

∙Remove the disc, knife and worm out of the cutter housing.

Attention! Blades are sharp! Do not clean the parts

in the dishwasher!

∙Wash all parts that came into contact with meat in hot soapy

water. Clean them immediately after use.

∙Rinse all parts with clear hot water and dry them immediately.

Tip: We advise you to lubricate the cutter unit and the grinding

discs with some vegetable oil.

∙Clean the housing with a damp cloth.

Workplace

Important:

Never place this device on or next to hot surfaces (e.g. hot stoves).

Only use it on a even, stable and a heat resisting surface. It is im-

portant that no inflammable items are near to the device. Do not

place the device on the edge of the table so that it cannot be

touched by children or fall down when touched.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba MG 3000 PRO in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1.21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba MG 3000 PRO Manual

Product: