488032
5
Zoom out
Zoom in
Previous page
1/11
Next page
8
9
Working place:
Place this device on a even and stable surface. Do not place the device
near objects that may be sucked in (such as curtains)
Do not place the device directly in front of people or animals.
For your health’s sake, please select the correct air speed.
Keep a minimum distance of 30cm from any metal object (e.g. radiators).
Safety instructions when using the device:
Always connect the device to a safety socket
Do not use the device unless it is fully assembled.
Route connecting cable in such a way as to avoid unintentional contact or pulling
during operation.
Unplug device from socket before moving its location.
Disconnect mains plug after use and before cleaning.
Operation
Only use the provided power cable.
The connecting socket is beneath the fold-away support foot at the front.
Start the device using the on/off button .
The electrostatics may generate a little noise when the equipment is first used.
The air speed is adjusted using the button.
The wavy lines show which setting has been selected (Min = , Max = ).
The turbo setting is selected for 20 minutes using the button, after that the
device sets itself back to the last choosen air flow speed. By against using the
button you brake the turbo air speed.
Silent mode: By pressing the for the fourth time the ON/OFF button is still
illuminated, but the symbols not.
The electrostatic propulsion creates a little airflow, although the fan is not working.
Another pressing of the button is restarting the fan with the lowest speed .
appears when the filter requires cleaning.
appears if the filter is still damp after cleaning and dries within 2 hours.
The blow-out angle can be adjusted using the fold-away support at the front.
Switch the device off using the on/off button after use.
Cleaning and maintainance:
Unplug the device.
Never immerse the device in water!
To remove the filter, press the symbol
and pull the filter out from above. Careful-
ly brush off the slats using the provided brush next to the connecting contacts.
The slat part can be rinsed with warm water.
Then dry thoroughly and re-insert.
The intake and outlet grilles can be vacuumed with a vacuum cleaner.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba LR8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba LR8 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info