Manual Steba LR 12 (page 14 of 40) (English, German, Dutch, Danish, French)

774584

Zoom out

Zoom in

1/40

Display

1. Start / Stop

2. Power level 1 – 4

3. UVC-light

4. Child lock

5. Timer pre-setting 1 – 12 hours

6. Timer finish 1 – 12 hours

7. Filter replacement

8. Ion generator

9. Night mode

10. Indication of air quality

The colored illuminated ring

around the display changes de-

pending on the air quality and

measurement by the PM 2.5 fine

dust sensor:

∙Green =

optimal air 0 - 50 µg / m³

∙Yellow =

moderate air 51 - 150 µg / m³

∙Red =

bad air from 151 µg / m³

Getting started

∙Doors and windows should be closed for an optimal cleaning performance.

∙Connect the device.

∙Press the start button 1). The display lights up and the ventilation runs at the low-

est level. The display shows the current air quality, e.g. 26 µg / m³.

∙The power level can be regulated with button 2).

∙To switch on the disinfecting UVC light, press button 3). The button lights up. The

UV light is switched off by pressing the button again.

∙The ion generator ensures a pleasant room climate through air enriched with neg-

ative ions. It is activated by pressing button 8).

∙With the time preselection 5) you can determine when the device should start

working (1 to 12 hours).

∙With button 6) you can determine when the device should stop working (1 to 12

hours).

∙Using the child lock 4) you can lock the buttons to prevent accidental changes to

the setting.

∙The device is switched to night mode with button 9). All previous settings are re-

tained, only the power level is reduced to the minimum and the device lighting

switches off.

∙The air intake and outlet must never be covered.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba LR 12 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0.66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba LR 12 Manual

Product: