535759
13
Zoom out
Zoom in
Previous page
1/44
Next page
13
Attention! In case of overheating, risk of fire! Keep a
safety distance of min 60cm to wet areas (e.g. Shower,
bath tubes, sinks) and min 120cm to water taps!
1. Operation:
When the unit is unpacked, place the appliance vertical on the floor and leave it for
12h, that the cooling liquid is bubble free
Take care that the water tank is inserted correctly.
Turn the humidity regulator is turned to “Off
Plug the appliance in with dry hands.
Ensure that the ventilation openings are open.
Press the ON/OFF button . The „Hi“ lamp is on and the „Run” is blinking. The ca
humiditiy of the room is shown in the display. The dehumidifier is programmed to
start with continuous dehumidification (CO). Important: When the unit is un-
plugged then the appliance will start the next time with the programmed setting.
The light “Operation” is flashing. In the display “Low” is shown, after that the
humidity of the room. The compressor starts working from a humidity higher than
50%.
The compressor is only working when the real humidity in the air is higher than the
adjusted.
The unit is suitable to work at temperatures from 5°C to 31°C.
The humidity performance is depending on the surrounding humidity and tempe-
rature. A good dehumidification is achieved at temperatures higher than 2C and
a humidity above 70%.
When the dehumidifier reaches the adjusted value, the compressor will stop wor-
king and starts again when the humidity is again above the programmed value.
Keep doors and windows closed of the room which should be dehumidified.
Take care that nothing can drop on the appliance.
During use, the appliance will create warm air.
To run the appliance continuously, turn the humidity regulator to “cont”.
2. Air speed:
The air speed can be changed, by pressing the button “Speed”. In the display “Hi” is
shown for air speed or “Low” for low air speed. The adjusted air speed is shown in
the panel with “High” or “Low” lamp.
3. Timer:
a) When the time should be adjusted, then press the “Timer” button. The time can
be adjusted in steps of one hour from one to 24hours. The „Timer“ lamp at the
panel is on.
b) When the time runs out then the appliance will switch off automatically.
c) When the appliance will be switched off by pressing the “Power” button before
the timer runs out, then the rest time of the timer will be deleted.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba LE 160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba LE 160 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info