Manual Steba LB6 (page 10 of 20) (English, German, Dutch, French)

488028

Zoom out

Zoom in

1/20

Steps of replacement:

1. Take off the tank, unscrew the cover and take out the water filter.

2. Fix new water filter.

Wash for the gullet (once a week)

If there is scale in the gullet, rub it with the brush provided then rinse it with water.

Wash for the outer space of the appliance:

Wash with a soft cloth in warm water below 40°C.

Rub the scale.

Wash the head of sprayer with water directly.

Store for the appliance:

Long time no use, wash up the appliance and dry it, then pack it in the original box

and store it in the dry place.

Warnings:

Do not wash it with soapy water. You should wash it with pure water. ∙

When washing the appliance, avoid water from splashing into the inner parts of ∙

the appliance or the spare parts otherwise they will be wet and might cause prob-

lems.

Do not tear down the appliance. ∙

SUGGESTIONS

Humidifying with tap water or distilled water. ∙

Clean the transducer, tank, and main body every week. ∙

Replace water frequently. ∙

Do not remove the water tank once it has been properly placed unless a refill of ∙

water is needed.

Whenever you need to pour away water from the water trough, unscrew at the ∙

bottom part of the main body (the outlet) then let the water flow out.

Keep the tank and gutter dry if the humidifier is going to be left unused for a long ∙

time.

Keep all parts of humidifier dry before packing off. ∙

It is forbidden to touch the transducer with hard objects. Clean the transducer with ∙

wet cloth. It is better to clean it with salt water.

COMMON PROBLEMS & SOLUTIONS

Abnormal problems Cause Solution

Power light is off, no wind

and fog

The plug is not in use and

the power is off

Put the plug in socket

correctly and turn it on

Power light is on;

wind exists but no fog.

The automatic humidity

knob is off, lid of the wa-

ter level floater is loose.

Make the tank full of

water. Turn the knob

clockwise. Tight up the lid

The odor of the fog New machine or water is

not clean

Open the water tank and

place it in the shade for 12

hours. Wash the tank or

change the water

Fog is little The energy changeable

appliance has scale, water

is dirty or long time no

change

Wash the energy appli-

ance and replace with

clean water

No fog There might be too

much water in the water

trough.

Pour away all the water in

the water trough and put

the tank back properly.

Water is not down Floater is loose or the

inletting water lid is dirty

Tight up the lid of the

floater and wash the lid of

the knob

Disposal:

Packaging disposal:

Do not throw away the package materials. Please put it in the recycling bin.

Gift box: Paper, should be put to the old paper collection point.

Plastic packaging material and foils should be collected in the

special collection containers.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources. To return

your used device, please use the return and collection systems or contact the retailer

where the product was purchased. They can take this product for environmental safe

recycling.

Service and Repair:

If the appliance must be repaired, plaese get in touch with your trader or with the

manufacturer:

STEBA Elektrogeräte GmbH & Co KG

Pointstr. 2, 96129 Strullendorf / Germany

Distribution-Tel.: 09543 / 449-17 / -18, Service-Tel.: 09543 / 449-44, Fax: 09543 / 449-19

e-Mail: elektro@steba.com Internet: http://www.steba.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba LB6 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba LB6 Manual

Product: