715017
13
Zoom out
Zoom in
Previous page
1/34
Next page
13
Scale remains at the base, the transductor and the water tank
should be wiped away. It is essential, that the transductor is
not damaged. When there is excessive scale some scale remover
should be used or fill vinegar in the bassin. After some time,
depending on deposit, the scale dissolved. After this the base
must be cleaned completely with clean water. The filter should
be put into salty water (1 spoon salt per litre) for one day for
recovery. Then rinse the filter with clear water and shake it and
then let it dry.
Steba tipp: Weekly cleaning avoids white sediments. Bacteria
and germs will not have a chance! When the device is regularly
used, its cleaning will be easier and quicker.
Carefully clean the ultrasonic membrane at the bottom part
with a brush. Scale reduces the atomization. Reassemble the
appliance and store in a dry place up till next usage.
Before the first use:
After a longer non use of the appliance the water filter should be placed for 20 min in salty
water. Positive ions make the water softer.
Important note - Filling in of water:
Remove the lid and slightly pull out the tank sloping backwards. The tank cap with the water
filter is opened by turning the tank cap counter-clockwise (it is located under the water tank
No. 4). Then you can fill in cold water in the filler neck. Tightly close the tank cap with the
water filter. Place the water tank correctly on the support No. 8 so that it can properly work.
Start-up of the device:
Connect the plug with the mains socket. A beep sound is heard, and the display shows the
current room temperature and humidity, and standby
ULTRASONIC HUMIDIFIER USER MANUAL
SPS-707
is indicated in red in the down left
corner of the display. The water tank is lit by a blue LED. The standby operation consumes
0,8 watt.
Press the Power button . The standby symbol disappears from the display, and your air hu-
midifier starts immediately. 1-6 bars are shown on the display, and water vapour comes down
from the water tank through the directed nozzles (No. 1) which you may turn by 360 degrees.
When no or not enough water is left in the tank, just a red drip is flashing on the display, and
10 beep sounds can be heard from the device. Refill water as described in (Filling in of water).
The device re-starts immediately after the full water tank has been placed in position again.
After approx. 1 minute, the display lighting (-50%) changes over to sleep mode to save energy.
As soon as you press a button, the lighting of the display returns.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba LB 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba LB 7 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info