Manual Steba LB 4 (page 9 of 22) (English, German, Dutch, French)

488026

Zoom out

Zoom in

1/22

Important Notice

Open water inlet Nr3 at the water tank Nr2, take out the water filter Nr4 and fill in

the water. Then close it correctly. If water is used which contains a lot of scale (more

then german grade3) then boiled or distilled water should be used.

Water containing a lot of scale can cause scale dust around the appliance of scale

remaining inside the appliance.

1. Scale dust can be removed by a vacuum cleaner.

2. Remains on the Transducer Nr7 or at the Bassin Nr9. In this case fill in some vinegar

into the Bassin and dissolve the scale. Then remove the vinegar and rinse carefully.

When the transducer is covered with scale then it cannot work correctly anymore.

3. Scale at the water filter Nr4. In this case put the water filter in some salty water (1-2

spoons per litre water).

4. Activate the water filter after purchasing the appliance or after a longer break.

Refer to point 3.

5. It is best to place the humidifier above a radiator (non electrical). The mist will be

spread in the room by the convection air of the radiator.

Usuage of the humidifier

The appliance is humidifying the air in a room.

Place the humidifier on a stable, flat and water resisting surface. To fill the water tank

remove the nozzle at the top and take the water tank our, with the handle. Then the

tank should be turned around and open the large lid at the bottom side of the tank.

Cold water should be filled at the bottom of tank in the tank. When the water is with

much scale it is better to use distilled or boiled water (before inserting it should cool

down). Never fill any chemicals, solvents or similar into the water tank. Put the plug

of the water tank on again and it must be screwed tight. Then the tank should be

turned around and placed on the base again. It must be taken care that the water

tank fits good on the base. Then put the nozzles back into place.

The power plug can then be put into the socket.

Press the „Power“- button. The water is then sprayed by ultrasonic in small particles

of ca 2-5µm. If there is non or not enough water inside the device the display shows a

small drop

Else in the middle of the display it shows 30% relative humidity.

By pressing the button „Humidity“, it is possible to adjust the humidity from 30% to

90% relative humidity in the surrounding of the device.

When the appliance reaches the adjusted humidity it stops working. When the humi-

dity falls bellow a lower value the appliance starts to work again automatically.

By pressing the „Min-Max“-button, it is possible to adjust the output of sprayed

water.

480-13024 - LB4 - 07-2011.indd 9 27.07.2011 10:54:28

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba LB 4 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba LB 4 Manual

Product: