535772
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
Use of the heater
Set the main switch on the rear panel
Press the
button. The display shows the current room temperature.
Press the SET button 1 time. OH flashes in the display. Adjust the time by using the
+/- button in steps of one hour up to 12 hours. Press the SET button again.
25°C flashes in the display. Adjust the time by using the buttons +/- in steps of 1°C.
By pressing the power button you adjust the power level from low (1300W) to
high (2500W).
Press the SET button, the device works.
If you want to heat without a time-setting, press the SET button twice after setting
the ON/OFF button, regulate the desired temperature and press SET again.
By pressing the button the oscillation starts.
Once the set time has passed the device shuts off or can be shut off by pressing the
button
For cooling, the fan runs for about 15 seconds after the device has been
shut off. Set the main switch.
If the device is used the first time very slight smoke might appear briefly due to pro-
duction residues.
If the appliance is used for the first time there can be a
little smoke due to some production oil residues.
Remote control
You can operate the device, as described above, up to a distance of 7 meters.
Cleaning of the filter
Pull out the power plug;
Press the filter button at the back of the product and pull it backwards;
Remove the sponge filter from its holder;
Clean the filter by water with wash powder under the temperature of 3C.
Safety in case of abnormal operation
In case of overheating the safety cut out protecting the heating element will auto-
matically switch off the appliance.
In this case the appliance stops working and the pilot light will remain switched on
even if the appliance is not working.
If this happens:
switch off the fan heater;
remove the causes of abnormal operation or overheating (i.e. obstacles in front
of air inlet or air outlet grille);
leave the heater cool down for 15/20 minutes;
switch on again the fan heater.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba KH 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba KH 7 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info