Manual Steba ik 50 (page 6 of 16) (English, German, Dutch, French, Italian)

336149

Zoom out

Zoom in

1/16

Keep the cable away from hot surfaces ∙

Do not keep the appliance unattended during the usage. ∙

Never store anything on the appliance or cover the air inlets. Insert no sharp things ∙

in the air in- and outlets.

Never store the appliance outside or in a wet place. ∙

Do not immerse the appliance in water or any other liquid (Danger of electric ∙

shock!). Protect the appliance from getting wet.

Never use the appliance, if the cable or the glass plate is damaged, cracked or drop- ∙

ped down.

To avoid any dangers, never change anything at the appliance or conduct any re- ∙

pair. Repairs and exchange of the power cord must only be done by an authorized

dealer.

The appliance can get hot. Only transport after cooling down. ∙

The appliance must not be used with an external Timer or any other remote con- ∙

trol.

∙ Danger. Appliance can get hot. Danger of burns!!

Never put pots, set of instruments or any other metallic parts on the appliance. ∙

These parts could get very hot, when the cooker is turned on. Never heat up closed

metallic cans. They could explode. The glass surface could show residual heat from

the heated pots.

Never carry, when there are still pots or pans on it. ∙

Never put more than 5 kg on the top of the plate. ∙

Never use the appliance without supervision. ∙

Never use the appliance near to magnetic sensible items (e.g. magnetic cards etc.) ∙

Do not operate the device on any metal table because this may cause potential ∙

serious danger to users and the appliance itself.

Implementing

Plug the power plug into a suitable outlet and an acoustic signal sounds. While ∙

plug on, the LED displays the temperature of induction cooker glass. When tempe-

rature lowers than 50°C, displaying „-L-“. When temperature is higher than 50°C,

displaying „-H-“.

Place suitable cookware in the centre of the hotplate. ∙

Now press the AN/STANDBY switch once to turn the induction hotplate on. The ∙

control lamps of “STUFE” and “TEMP.” blink and an acoustic signal sounds, the

“-L-” or “-H-” in the display disappears. (NOTE: should no further operation in

30 seconds after pressing AN/STANDBY key, the control lamps of “STUFE” and “

TEMP.” go off, the unit goes back to standby status automatically and the display

shows “-L-” or “-H-” again. To re-operate the unit, simply press ON/STANDBY key

once and other function keys.)

Power

The pot should be placed on the appliance.

Press the „AN/STANDBY“ button. In the display “Stufe” is flashing. When there is no

adjustment within ca. 1min then the appliance returns to the stand-by modus.

Press the button “Stufe”(= means Power) and in the display you can see 5.

With the rotary knob the Wattage can be adjusted.

1 = 900 Watt* 2 = 915 Watt* 3 = 915 Watt 4 = 950 Watt 5 = 1180 Watt

6 = 1290 Watt 7 = 1450 Watt 8 = 1550 Watt 9 = 1750 Watt 10 = 2000 Watt

(*= cycled)

All Power steps should be used to cook water or soups. If meat or vegetables should

be roasted, then the temperature function should be used to achieve a good result.

Temperature

This function should be used to roast meat or vegetables. Place the pot on the appli-

ance. Press the „AN/STANDBY“ button. Then press the temperature button 2 times.

In the display appears 120°C. By turning the rotary knob the temperature can be

adjusted from 60-240°C. The build in sensor keeps the temperature at the adjusted

temperature. If the overheat temperature sensor switches the appliance off then the

displays shows E05. The appliance should then be cooled down for short time and can

be restarted.

Important: It is only possible to adjust either temperature or Power. Both together

are not possible.

It is always possible to switch during cooking from Temperature to Power, even when

the Timer is set. In the display the lights show what is adjusted

Timer Setting

Adjust as described before the Power or Temperature. Then press the Timer button.

In the display “0” is shown. Now you have ca 5sec time to adjust the in 5min steps

from 0-180min upwards and in 1 min steps back. When there is no adjustment within

5 sec the display returns to the chosen function. If this happens please redo the de-

scribed procedure.

Should the time be adjusted during the appliance is working and the Timer is wor-

king then press 1x the Timer button. At the display the Timer light is on. Now you

have ca 5 sec time to adjust the time with the rotary knob. After ca 5 sec the display

Temperature and Timer or Power and Timer until the time runs out and the appliance

returns to the stand by modus.

By pressing the „AN/STANDBY“ button the program can be deleted. If no or a not

suitable pot is put on the appliance and adjust the Temperature or Power then a bee-

ping sound can be heard every 2 sec and at the display 3 lines are shown. The fan is

working. After a certain time (ca 15sec) the appliance returns to the stand-by modus.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba ik 50 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba ik 50 Manual

Product: