653401
24
Zoom out
Zoom in
Previous page
1/38
Next page
24
Power
After the unit is plugged in and the switch at the side of the control unit is pressed.
Press the button and in the display appears C0.
Press another time the
button and C5 will appear in the display, the appliance
starts heating.
To change the Power press first the Power button
, in the display C5 is flashing. Now
there is ca 5sec time to change the temperature or the display will return to C5.
By pressing the / buttons the heating power can be changed.
C5: 25C Grilling on highest power
C4: 21C Grilling on middle power (e.g. fir tender meat)
C3: 150°C Grilling on low power (e.g. fish or vegetable)
C2: 12C low temperature
C1: 80°C keeping warm for dishes
If there is not any pressing of the / buttons within 5 sec, then the power button
must be pressed again to change it the power level.
Timer
Press the Timer button , in the display „00“ is flashing. Now there is ca 5sec time to
change the Time or the display will return to the adjusted power level.
By pressing the button the time can be changed.
Button pressed only short time: 1 Minute steps
Button pressed longer time: 10Minute steps
Max adjustable time 99 minutes
When the LED in the display is flashing, the timer is working.
In the display you can see the Time and the adjusted Power changing. After the time
run out the appliance will switch off and a beeping sound can be heard.
Residual heat
After a certain temperature is reached the residual heat light will be switched on.
The residual heat light will flash after the unit is turned off until the plate cooled
down. Notice: The appliance is equipped with a cooling fan. Never unplug the ap-
pliance immediately after the unit is switched off. Please wait until the residual heat
light turned off. With this damage of the electronic can be avoided.
Cleaning and maintainance:
The device should be cleaned after each use
Unplug the device
The device should cool down a little. It can be cleaned easier when it is not that
hot.
Never immerse the device in water!
Use a humid cloth with a little bit of detergent to clean it.
Burned in residues can be sprayed with an oven cleaner and should stay on the top
for at least 1h. The solved residues can then be wiped away with a damp cloth.
480-13217 - GP2 ECO - 06-2011.indd 24 12.07.2011 10:01:25
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba GP2 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba GP2 ECO in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info