653396
15
Zoom out
Zoom in
Previous page
1/42
Next page
15
Preparing for deep fat frying
Insert the heating element into both guide rails on the outer casing. Otherwise the
deep fat fryer will be prevented from starting up by the safety switch.
Place deep fat fryer on table, not against the wall, in a corner or beneath an extractor
hood.
Place oil that is suitable for deep fat frying into the deep fat fryer. However if the
overheat protection is activated anyway, switch off, press the „Reset“ button on the
back of the electrical part with a 5mm diameter pen (e.g. tip of a ballpoint pen). Then
allow the heating element to cool for a while and remove it from the guide rail on
the outer casing. The overheating protection activates if the amount of fat in the de-
vice is below the minimum or the fat has become contaminated with too much food
(e.g. breadcrumbs).
Connect power cable to the power supply. Check filling level.
The MAX mark must not be exceeded, and filling level must not drop below the Min
mark. The heating element on the bottom of the container must always be covered
with oil or liquid fat.
Never operate the device without fat or with an insufficient amount of fat.
Make sure that there is enough fat in the appliance!
Attention! Do not allow water to get into the oil!
Assembly of the handle on the frying basket
Anbau des Griffes am Frittierkorb
DF 300, DF 282, DF 180, DF 100
1)
5)
4)
3)
2)
1)
5)
4)
3)
2)
Anbau des Griffes am Frittierkorb
DF 300, DF 282, DF 180, DF 100
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba FGN 2.0 XXL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba FGN 2.0 XXL in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info