Manual Steba e 120 (page 11 of 24) (English, German, Dutch, French)

397463

Zoom out

Zoom in

1/24

Assembly:

The motor base should be wiped with a damp cloth. All other parts can be rinsed ∙

and dryed.

Attantion: In the sieve are sharp knives!

Take care, that the switch is on position “0” ∙

Place the juice collector onto the motor base, the juice spout should be placed in ∙

the curving of the motor base.

Put the sieve into the juice collector. Then press the sieve without force at the edges ∙

on the motor base until you hear a slight click sound. Take care that the sieve is not

shaky.

Put the lid on the juice collector and close the locks. ∙

Ensure that the locking bow is tightly closed. ∙

Place an pulp connector under the pulp ejection. Hint: For a more easy cleaning of ∙

the pulp container put a small plastic bag inside to collect the pulp.

Place the juice collector under the spout. ∙

Then plug in the appliance.

Usuage:

When the appliance is used for the first time the motor can have a little smell, ∙

which stops fast

Switch position “I”: slow speed- for soft fruits like grapes, melon, etc Switch poition ∙

“II”: high speed- for hard fruits and vegetables like apples, carrots etc

Never place food with a stone or a hard skin into the feeding opening. ∙

Press the pusher slowly, without force down. Never use any other appliances or put ∙

fingers into the feedding opening. Risk of injuries!

After the last filling let the appliance work for some seconds, that the juice can ∙

drop out of the spout.

Do not overfill the pulp container, as this can cause problems during usage or even ∙

damage the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba e 120 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba e 120 Manual

Product: