653376
16
Zoom out
Zoom in
Previous page
1/60
Next page
16
Heating up hardened fat in the deep fat
fryer.
Risk of scalding!!!
Always proceed exactly as described in the following. Set control knob to
(heat)
and melt slowly. The fat that has melted at the heating element is otherwise unable
to penetrate the solid layer above it. If the overheating protection switches the device
off, press the "Restart" button as described above.
Carefully make several holes in the fat using an object made from wood or plastic.
Take care not to damage the heating element when doing this! Close the lid. Keep
lid closed during the melting procedure in order to avoid spatter. No warranty will be
given in the event of erroneous operation!
Make sure that there is enough fat in the appliance!
Attention! Do not allow water to get into the oil!
Deep fat frying
Always use the basket for deep fat frying!
Switch in the device. The red light comes on. Set regulator to required temperature
depending on what is being fried. The fryer starts to heat up. The light illuminates
in green until the set temperature is reached. When the set frying temperature is
reached, the green light goes off.
Place the prepared food into the frying basket and distribute over the entire surface.
Do not place too much food in the fryer. Then slowly immerse the food in the fat.
Close the filter lid again. The filter lid provides protection from fat spatter and redu-
ces the smell of fat.
Observe the procedure through the inspection window. If the fat foams up excessi-
vely, open lid and raise and lower the basket several times by raising and lowering
the handle until the foaming subsides. Keep the fryer closed during frying, which will
prevent spatter and the frying fumes that are generated can be absorbed by the filter
in the lid.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba DF 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba DF 200 in the language / languages: English, German, Danish, French, Italian as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info