653372
24
Zoom out
Zoom in
Previous page
1/42
Next page
24
The ingredients are
poorly stirred and
baked
selected an improper
program
The lid was opened sev-
eral times during opera-
tion
Stir resistance is too large
so the kneader cannot
rotate and stir properly.
Select the proper program
Do not open the lid
Check the kneader, and
then operate without
load. If the problem is not
fixed, contact the autho-
rized service center.
It is very difficult to
take bread out
Kneader adheres tightly
to the shaft in bread pan
After taking the bread
out, put hot water into
the bread pan and let the
kneader soak for around
10 minutes, then take it
out and clean.
The display shows
“HHH” after you
have pressed the
“Start/Stop” button
The temperature in bread
maker is too high
Press the “Start/Stop”
button and unplug bread
maker. Allow the appli-
ance to cool.
The motor noise is
heard but the
dough is not stirred
Bread pan is fixed improp-
erly or dough is too much
Check whether the bread
pan is fixed properly, as
well as the recipe
The dough rose too
high.
Too much yeast
Forgot to add the salt.
Try using less yeast
The bread did not
rise enough.
No or too less yeast
Yeast may have a poor
activity as water tempera-
ture is too high or yeast is
mixed together with salt
The environment tem-
perature is lower.
Check the amount and
quality of yeast,
increase the environment
temperature
Bread size is so
large as to push
cover
The amount of yeast, flour
or water is excessive
The temperature in the
room is too high.
Reduce the amount of
ingredients according to
the instructions.
The recommendations provided above are based on the assessment and analysis of
the most common operation problems. For safety reasons, do not disassemble or
repair the appliance on your own. If the problem persists, contact Authorized Service
Centre.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba BM1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba BM1 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info