Manual Steba AW 210 Pure (page 14 of 34) (English, German, Dutch, French)

715019

Zoom out

Zoom in

1/34

Display

1) ambient humidity

2) humidity level

3) ventilation

4) ionisation

5) child lock

6) water preheating

7) water level

8) remaining time

ON/OFF

∙ Press this button, a sound beep and the display shows the current humidity. The

device starts in the standard mode (air moistening – high ventilation for 1 minute

– ionisation).

∙ After 1 minute, the device turn to the automatic program and the symbol blinks.

∙ If the humidity is higher than 60%, the device turns off automatically.

∙ If the humidity is between 45% and 59%, the device works with low ventilation

speed.

∙ If the humidity is below 45%, the device works with high ventilation speed.

∙ By pressing the On/Off button again, the device turns off. The ventilation keeps

running for 30 seconds.

Humidity

∙ The relative humidity in a room at 20°C should be:

∙ bedroom or living room: 45-60% RH

∙ sickroom: 40-50% RH

∙ library: 40-50% RH

∙ By pressing the button, the humidity can be set in steps of 40% - 50% - 60%

- 70%.

∙ If the ambient humidity is above the set humidity, the air moistening stops and the

display shows .

∙ If the humidity is 1% - 14% below the set humidity, the ventilation works at low

speed.

∙ If the humidity is more than 15% below the set humidity, the ventilation works at

high speed.

∙ The colour of the display changes depending on the humidity:

∙ Red: < 40% RH

∙ Green: 40 – 59% RH

∙ Blue: > 60% RH

∙ The colour change of the display can be turned off by pressing the On/Off button

longer than 3 seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steba AW 210 Pure in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steba AW 210 Pure Manual

Product: