619139

StarTrac S-TRx Treadmill Manual

26
Zoom out
Zoom in
Previous page
1/52
Next page
26
1. Before beginning your workout, or during a pause, moisten the back of the transmitter on the heart rate strap (not
included). Place the strap snugly around your chest with the transmitter resting directly over your sternum.
2. When your heart rate has been acquired, your heart rate in beats-per-minute (BPM) displays in the H
EART RATE
Window.
3. Remove the heart rate strap, if you wish to remove your heart rate reading from the display.
NOTE: The performance of the transmitter may be affected by body types, body oils, metal in clothing, and outside electrical
interference. Always be sure that the transmitter and skin are in good contact. Avoid operating other electrical equipment near
your treadmill when you use the heart rate strap.
LOCKOUT ID PROCESSING
When the Lockout Enable has been set in Manage / Maintenance Mode (see “Manager Mode” or “Maintenance Mode”, as
appropriate), users must enter a Lockout ID number to enable the treadmill for operation.
To enter a Lockout ID:
1. Stand on the running belt and press the desired program key.
• If Lockout Enable is set, the message “TREADMILL LOCKED; PRESS 0 TO ENTER ID” scrolls across the
Profile Window.
2. Press the
key, then use the keys to enter the three-digit Lockout ID. Entered digits will show in the
Profile Window.
3. When the Lockout ID has been entered, press the
key.
• If you enter the correct Lockout ID, the message “VALID ID” scrolls once across the Profile Window. You may
continue with normal operation of the bike (see “Quick Start” or “Preset Programs”, as desired).
• If you enter an incorrect Lockout ID, the message “INVALID ID” scrolls once across the Profile Window. Make
sure you have the correct Lockout ID, then repeat steps 1 through 3 to re-enter.
QUICK START
QUICK START lets you begin your workout by simply pressing one key. QUICK START uses a default weight of 155 pounds (70
kg) and a time limit of 99 minutes. YOU control the treadmill speed, incline and distance for up to the maximum allowed
program time.
NOTE: The default time and weight are adjustable through Manager / Maintenance Mode.
To operate the Q
UICK START program:
1. Stand on the running belt and press the QUICK START key. The running belt slowly accelerates to its minimum speed
as defined in Manager / Maintenance Mode.
• If necessary, enter the Lockout ID to enable the treadmill for operation (see “Lockout ID Processing”).
2. If desired, you can use the personal fans during your workout (see “Using the Personal Fans” for details).
3. You can adjust the incline of the treadmill during the program:
• You can adjust treadmill incline from 0 to 15%, in 0.5% increments. Press the
key to increase the
treadmill incline; press the
key to decrease the treadmill incline.
4. You can adjust the speed of the treadmill during the program:
• You can specify a desired speed from 0.5 to 12.5 mph (0.8 to 20.0 kph) using the numeric keypad. Use the
keys to enter your desired speed, then press the key to accept the entered speed.
• You can adjust treadmill speed from 0.5 to 12.5 mph (0.8 to 20.0 kph), in 0.1 mph (or 0.1 kph) increments. Press
the
key to increase the treadmill speed; press the key to decrease the treadmill speed.
5. You can pause the program during your workout by pressing the S
TOP key once. The program will pause for a preset
period of time (30, 45, 60, 90 or 120 seconds, as set in Manager/Maintenance mode). Press the S
TART key BEFORE
the pause timer expires to resume your program. The treadmill returns to its minimum speed when you exit the
pause mode.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StarTrac S-TRx Treadmill at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac S-TRx Treadmill in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info