619139
17
Zoom out
Zoom in
Previous page
1/52
Next page
17
2. Install the Neck
Locate the neck assembly (Qty. 1) and neck grommet (Qty 1) with console cables pre-installed inside. Remove
packing material and slide the neck grommet over the neck. Position the neck in place on the motor end of the base
assembly and secure with four 5/16"-18 x 2.0" socket head bolts, 5/16 lock washers, and 5/16" flat washers. Install all
four bolts then tighten securely.
3. Install the Display Console
Locate and position the display console on the neck, taking care not to pinch the display cable between the neck and
the console. Once the console is properly positioned, secure the console to the neck using four 5/16"-18 x 1.0" socket
head bolts, 5/16 lock washers, and 5/16" flat washers. Install all four bolts then tighten securely.
5/16-18 x 1 3/4” Socket Head Bolts
5/16 Lock Washers
5/16 Flat Washers
5/16-18 x 1” Socket Head Bolts
5/16 Lock Washers
5/16 Flat Washers
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StarTrac S-TRx Treadmill at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac S-TRx Treadmill in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info