619111
14
Zoom out
Zoom in
Previous page
1/20
Next page
STEP #3 – ASSEMBLE CAM ASSEMBLY AND LEVERAGE CURL ARMS :
1. Slide one of the CAM ASSEMBLYS onto the mount of the Main Frame as shown, the side of CAM ASSEMBLY that
has shaft slide onto the mount first.
2. After the CAM ASSEMBLY has been slid onto the mount, slide one of the LEVERAGE CURL ARMS onto the
corresponding shaft of the CAM ASSEMBLY as shown below, At the same time, align the hole of the shaft with the hole of
the mount of the LEVERAGE CURL ARMS, using one (M8x50mm SHOULDER BOLT), one (M6 FLAT WASHER), and
one (M6 NYLOCK NUT), then install one END CAP and one (M8x20mm SOCKET HEAD BOLT). Do not tighten these
bolts at this time.
3. Repeat step 1 thru 2 with the remaining CAM ASSEMBLY and LEVERAGE CURL ARM as shown below.
Page 14
STEP #3 Completed
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StarTrac IP-L5002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac IP-L5002 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info