619138

StarTrac E-ST 5090 Stepper Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
GLUTE SCULPTOR PROGRAM
The GLUTE SCULPT
OR program provides a workout designed to target your gluteal muscles. For best results while using the GLUTE
SCULPTOR program, stand up straight while stepping, and take long steps.
To operate the GLUTE SCULPTOR program:
1. Mount the Stepper, begin stepping, and press the key.
2. You are prompted to enter your weight. The Stepper displays a default weight as set in Manager/Maintenance Mode. You may
enter any weight from 1 to 350 pounds (1 to 158 kg).
n Use the keys to enter your current weight; or press the or key, as necessary, to increase or decrease the
displayed weight in 1 pound (or 1 kg) increments.
n When you correct weight has been entered, press the key to accept the displayed value.
3. You are prompted to enter a time goal. The Stepper displays a default time of 20 minutes, or equal to the time parameter set
in Manager/Maintenance Mode if less than 20 minutes. you may enter any time from 1 to 99 minutes.
n Use the keys to enter the desired time goal, or press the or key, as necessary, to increase or decrease
the displayed value in 1 minute increments.
n When your desired time goal has been entered, press the key to accept the displayed value.
4. You are prompted to enter a difficulty LEVEL.
n Use the keys to enter a difficulty LEVEL (from 1 to 20) or press the or key, as necessary, to increase or
decrease the difficulty LEVEL in 1 unit increments.
n When the desired difficulty LEVEL has been entered, press the key to confirm the difficulty LEVEL.
5. If desired, you can use the personal fan during your workout (see "Using the Personal Fan" for details).
6. You can adjust the difficulty LEVEL during the program, using either of the following methods:
n Use the keys to enter a difficulty LEVEL (from 1 to 20). When the desired level has been entered, press the
key to confirm the difficulty LEVEL.
n Press press the or key, as necessary, to increase or decrease the difficulty LEVEL in 1 unit increments.
7. You can scroll through workout data during the program ( see "Viewing Workout Data During a Program" for details).
8. If you wish to pause the program, stop stepping. The Stepper will enter a pause mode and display your workout results for one
entire cycle.
9. When you have reached your workout goal, the Stepper enters the Cooldown cycle (see "Cooldown Cycle" for details). If you
wish to exit the program before you have reached your workout goal, stop stepping and allow the Pause timer to expire. If you
wish to skip the Cooldown cycle, press the key to view your workout summary.
THIGH TONER PROGRAM
The THIGH TONER program provides a workout designed to target your thigh muscles. For best results while using the THIGH TONER pro-
gram, lean forward slightly while stepping, and take short steps.
To operate the THIGH TONER program:
1. Mount the Stepper, begin stepping, and press the key.
2. You are prompted to enter your weight. The Stepper displays a default weight as set in Manager/Maintenance Mode. You may
enter any weight from 1 to 350 pounds (1 to 158 kg).
n Use the keys to enter your current weight; or the or key, as necessary, to increase or decrease the dis-
played weight in 1 pound (or 1 kg) increments.
n When you correct weight has been entered, press the key to accept the displayed value.
3. You are prompted to enter a time goal. The Stepper displays a default time of 20 minutes, or equal to the time parameter set
in Manager/Maintenance Mode if less than 20 minutes. you may enter any time from 1 to 99 minutes.
n Use the keys to enter the desired time goal, or press the or key, as necessary, to increase or decrease the
displayed value in 1 minute increments.
STAR TRAC E-ST STEPPER OWNER’S MANUAL 21
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StarTrac E-ST 5090 Stepper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac E-ST 5090 Stepper in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info