619138

StarTrac E-ST 5090 Stepper Manual

17
Zoom out
Zoom in
Previous page
1/28
Next page
The Information Window also displays important instructions and cues throughout the workout.
The Upper and Lower Data Information Windows
also display information during a workout.
To view workout data during your workout:
1. Press the Upper Data Information Window SCROLL key to view the following workout data (the current data display is indicat-
ed by an LED next to the parameter name):
n CALORIES - Shows your aggregate caloric expenditure thus far in your workout.
n CAL/HR - Shows your current caloric expenditure per hour based on your current difficulty level and stepping rate.
n WATTS - Shows your current watts expenditure at that specific time during your workout.
NOTE: Press the SCROLL key to toggle between data during your workout.
2. Press the Lower Data Information Window SCROLL key to view the following workout data (the current data display is indicat-
ed by an LED next to the parameter name):
n DISTANCE - Shows the total number of vertical feet or meters you have climbed thus far.
n SPEED - Shows the speed at which you are currently stepping, in steps-per-minute.
n METS - Shows your current METS expenditure at that specific time during your workout.
PAUSE MODE
If you come to a complete stop during your workout (SPM is less than 10), the Stepper will enter a “pause” mode. To continue your work-
out, begin stepping before the “pause” time expires and your workout data will not be lost.
COOLDOWN CYCLE
Once you have completed your workout, the Stepper enters a two-minute Cooldown cycle.
NOTE: The Stepper software is programmed to properly decrease difficulty level to provide a cooldown.
To operate the Stepper during Cooldown:
1. You can adjust the difficulty LEVEL during Cooldown.
n Use the keys to enter a difficulty LEVEL (from 1 to 20); or press the or key, as desired, to increase or
decrease the difficulty LEVEL in 1 unit increments.
n When the desired difficulty LEVEL has been entered by using the keys, press the key to accept the displayed
LEVEL.
2. When the Cooldown cycle ends, your workout summary displays in the Information Window. If you wish to exit the Cooldown
cycle before it ends automatically, stop stepping.
USING THE PERSONAL FAN
The STAR TRAC E-ST STEPPER is equipped with a built-in personal fan to increase your comfort during a workout. You can control
the fan speed during your workout.
To operate the personal fan:
n Press the key, as necessary, to cycle the personal fan from OFF to HIGH to LOW to OFF. An LED indicator lights to
show the currently selected fan speed.
n The fan remains set at the set speed if you pause your program, unless your workout was less than two minutes in length.
n The fan turns off automatically if you exit your workout, or when you complete your workout program.
n The fan turns off automatically if you pause your program and the time elapsed is less than two minutes.
STAR TRAC E-ST STEPPER OWNER’S MANUAL 17
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StarTrac E-ST 5090 Stepper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac E-ST 5090 Stepper in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info