Manual StarTrac 7290 - Studio 7 (page 23 of 26) (English)

618989

Zoom out

Zoom in

1/26

Star Trac Studio Series Group Cycle Bikes Owner’s Manual |

9. When the belt tension is set to the proper range, replace the out and inner belt guards, and the round

rubber disc on the outer belt guard.

Replacing Worn Brake Pads on the Studio 3, Studio 5, and Studio 7

Your Studio series bike is equipped with a friction brake pad that pushed against the flywheel for creating

resistance when pressure is applied by the resistance knob. The brake pad consists of an oiled leather strap and

a dense foam pad attached to an aluminum block. Over time with normal use the leather pad will become dry and

worn, and the foam pad will deform, requiring brake pad replacement. The amount of time that a brake pad will

last depends on the frequency and intensity of use. Key indicators that a brake pad is worn are when the

resistance no longer feels smooth, the pad develops a dry “scratchy” feel, or the brake pad makes a grinding

sound.

NOTE: The brake pad replacement procedure is shown below for the Studio 7; however, the procedure is the

same for the Studio 3 and Studio 5.

1. Remove the side fenders from both sides of the bike by removing the three screws holding each fender in

place.

2. Remove the bottom screw on each side of the brake pad that holds the links to the top of the brake pad.

3. Flip the links up out of the way of the brake pad.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac 7290 - Studio 7 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

StarTrac 7290 - Studio 7 Manual

Product: