619005

StarTrac 7160 Series - Spinner PRO plus Manual

24
Zoom out
Zoom in
Previous page
1/28
Next page
24
| SPINNER PRO+ MANUFACTURED by STAR TRAC OWNER’S MANUAL
Inspection / Adjustment
Inspect major moving parts that require constant proper torque. Loose or misadjusted parts can result in personal injury or damage to the
bike. Check the following parts for security and/or proper torque.
Inspect all major moving parts that require constant proper torque. Loose or misadjusted parts can result in personal injury or
damage to the bike. Check the following parts for security and/or proper torque.
Pedals
Verify that the pedals are re-torqued after the first 10 hours of use and every 100 hours of operation, thereafter. Use a torque wrench
if components are loose.
NOTE: The pedal to the crank arm bolt torque is: 33-37 lb-ft.
IMPORTANT: If your facility allows members to interchange pedals, it is critical that the pedals are checked after each class to prevent
damage, which may lead to injuries if ignored.
Weekly Maintenance
Weekly maintenance should focus on the overall performance of the Spinner
®
indoor cycling bike. During these inspections, look for
vibration and possible loose assemblies.
Have an experienced rider ride each bike to identify and help diagnose any vibration, noises, and any "unusual" feeling from the drive
chain. Either faulty flywheel alignment or a loose chain can cause vibration.
Check for proper flywheel alignment. Torque flywheel nuts as necessary.
Remove chain guard and check for loose chain. Adjust chain as necessary.
Inspect each bike for loose assemblies, parts, bolts and nuts. Give particular attention to the following:
Tighten all frame base hardware.
Tighten all pop-pin handles.
Tighten seat hardware.
Tighten pedal toe clip / toe straps.
Inspect and tighten tension knob assembly.
Monthly Maintenance
The monthly maintenance check should be a comprehensive inspection of the overall frame and main assembly components of the
Spinner indoor cycling bike in addition to the Weekly Maintenance.
Inspection and Adjustment
Inspect the frame and main assembly components for rust or corrosion. Tilt the bike or place in an upside down position to locate areas
where rust and corrosion may develop. Use a small, wire brush to remove rust build-up in small crevasses, such as leveling feet, pop pin
handles and other bolt assemblies. Give particular attention to the following areas:
Leveling feet
Pop pin handles
Inspect all wear items for adjustments or possible part replacement. Give particular attention to the following:
Inspect brake pad for wear. Excessive wear, such as glazing or leather separation, indicates replacement is required.
Inspect seat pad for wear. Rips, tears or excessive movement indicates replacement is required.
Inspect pedals for play. Excessive movement of pedals indicates replacement is required.
Tighten seat hardware.
Tighten pedal toe clip / toe straps.
Inspect and tighten tension knob assembly.
Leveling feet.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StarTrac 7160 Series - Spinner PRO plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac 7160 Series - Spinner PRO plus in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info