619005
18
Zoom out
Zoom in
Previous page
1/28
Next page
18
| SPINNER PRO+ MANUFACTURED by STAR TRAC OWNER’S MANUAL
Instructions
Your Spinner
®
indoor cycling bike is easy to use. The bike allows full control over the resistance by simply adjusting the brake pad.
Typically, lower resistance levels enable you to pedal at a faster pace, placing increased demand on the cardiovascular system. Higher
resistance levels will typically deliver a greater muscle/endurance workout at lower revolutions per minute (RPM). RPM parameters in the
Spinning program range from 60 to 110 RPM.
Additionally, the bike offers seat and handlebar adjustments, allowing the bike to be configured to each users comfort zone.
This section provides the instructions for making seat adjustments, handlebar adjustments, pedal strap adjustments, and for controlling
resistance.
PLEASE NOTE: In a club setting, we recommend each user to initially be properly fitted on the bike by a certified Spinning
instructor.
Seat Adjustments
Proper seat height helps ensure maximum exercise efficiency and comfort, while reducing the risk of injury. Adjust the seat height so that
the knee joint is slightly flexed when the extended leg is at the bottom of the pedal stroke. Once the proper height has been achieved,
adjust the seat forward or back so that when the feet are in the 3 o’clock and 9 o’clock positions, the forward knee is directly over the
pedal axle. Recheck the seat height again after making the fore/aft adjustment, as moving the seat forward and backward can have the
same effect as moving it higher or lower
To adjust the seat height:
Dismount the bike. Turn the seat height pop-pin counterclockwise and pull out on the pin to release it from its current preset location.
Raise or lower the seat to the desired height, then gently release the pop-pin. Raise or lower the seat slightly, if necessary, until the
pop-pin engages a preset hole, Turn the pop-pin clockwise to secure. Be sure to tighten firmly.
To adjust the seat horizontal position:
Dismount the bike. Loosen the seat fore-and-aft tension knob by turning the knob counterclockwise. Move the seat forward or back to the
desired position and then tighten the tension knob by turning clockwise.
Spinner Pro+
Seat Pop-Pin
Spinner Pro+
Fore/Aft Pop-Pin
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StarTrac 7160 Series - Spinner PRO plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac 7160 Series - Spinner PRO plus in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info