Manual StarTrac 7160 Series - Spinner PRO plus (page 15 of 28) (English)

619005

Zoom out

Zoom in

1/28

SPINNER PRO+ MANUFACTURED by STAR TRAC OWNER’S MANUAL |

4. Installing the Back Leg (Fig. 4)

Fig. 4

A. Place the back leg in position at the rear of the bike, aligning the

two holes in the leg with the mating holes in the frame bracket.

B. Insert two 8mm x 50mm button head bolts through each leg into

the frame bracket with a flat washer between the leg and bolt.

C. Use a 5mm Allen Wrench to tighten each bolt securely.

5. Installing the Front Leg (Fig. 5)

Fig. 5

A. Place the front leg in position at the front of the bike, aligning

the two holes in the leg with the mating holes in the frame

bracket.

B. Insert two 8mm x 50mm button head bolts through each leg into

the frame bracket with a flat washer between the leg and bolt.

C. Use a 5mm Allen Wrench to tighten each bolt securely.

6. Installing the Pedals (Fig. 6)

Fig. 6

A. Insert each pedal into the corresponding crank arm.

B. Using a rubber mallet; tap the center of each pedal with medium

force to lock each pedal in place.

C. Insert the pedal securing bolts into each pedal thru the back of

each crank arm using an 8mm hex key.

D. Torque each pedal securing bolt to 33-37 lb-ft.

NOTE: Each pedal is marked with an indentation of the

letters “L” (LEFT) or “R” (RIGHT) towards the corner of the

surface where the SPD clips are located.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac 7160 Series - Spinner PRO plus in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

StarTrac 7160 Series - Spinner PRO plus Manual

Product: