Manual StarTrac 7090 Series - Spinner NXT (page 7 of 30) (English)

619115

Zoom out

Zoom in

1/30

   





ASSEMBLY

1. Install the Back Leg

Place the back leg in position at the rear

of the bike, aligning the two holes in the

leg with the mating holes in the frame

bracket.

Insert two 8mm x 70mm bolts through

the frame bracket and back leg, and

install a flat washer and nut on each

bolt. Using the #5 Allen Wrench and

Multi-Purpose Wrench, tighten the nuts

securely.

Step 1

2. Installing the Front Leg

Place the front leg in position at the

front of the bike, with the casters facing

forward, aligning the two holes in

the leg with the mating holes in the

frame bracket.

Insert the two 8mm x 60mm bolts

through the frame bracket and front

leg, and install a flat washer and nut

on each bolt. Using the #5 Allen

Wrench and Multi-Purpose Wrench,

tighten the nuts securely.

Step 2

3. Install the Pedals

Install the pedals on the pedal cranks

using the Multi-Purpose Wrench. The

closed end of the pedal cage must point

forward, toward the front of the bike.

NOTE: Turn the left pedal spindle

counterclockwise when threading into

the crank arm; turn the right pedal

spindle clockwise when threading into

the crank arm.

Step 3

4. Install the Seat

Insert the seat post into the frame

assembly and secure in place using a

tension handle.

Position the seat on top of the seat post

and secure in place using a tension

handle and washer.

NOTE: Tighten the tension handles

firmly.

Step 4A Step 4B

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac 7090 Series - Spinner NXT in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

StarTrac 7090 Series - Spinner NXT Manual

Product: