781907
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
USED SYMBOLS
Wear protective gloves
Wear eye protection
Wear hearing protection
Wear dust protection masks
We have marked the places that affect your safety
with the following signs: m
Attention: Laser radiation
Do not stare into the beam
Class 2 laser
Protect yourself and you environment from acci-
dents using suitable precautionary measures!
Do not look directly into the laser beam with unpro-
tected eyes.
Never look into the path of the beam.
Never point the laser beam towards reecting surfaces
and persons or animals. Even a laser beam with a low
output can cause damage to the eyes.
Caution - methods other than those specied here can
result in dangerous radiation exposure.
Never open the laser module. Unexpected exposure to
the beam can occur.
If the machine is not used for an extended period of
time, the batteries should be removed.
The laser may not be replaced with a different type of
laser.
Repairs of the laser may only be carried out by the la-
ser manufacturer or an authorised representative.
m Safety instructions
Working with the tile-cutting machine can be risky, if
safe and correct work procedures are not followed. Not
observing the customary safety measures can lead to
physical injuries to the operators. Safety equipment such
as protective goggles, dust masks and ear protection
can reduce the risks of possible injury. Even the best
possible protection however, cannot match incorrect as-
sessment, carelessness or negligence. Always use your
healthy common sense and caution in the workshop.
If you feel an operation is risky, do not try it out. Think
about an alternative method which feels safer. Think of
the following: Your physical integrity is your personal re-
sponsibility.
This machine was designed to perform certain jobs.
We recommend urgently that the machine should not be
altered and it should not be used for application areas
for which it was not designed. If you are not sure, please
ask your dealer before working with the product.
Warning: Non-observation of these specications can
lead to serious injuries.
Maintain the protective devices at the workplace in
good condition.
Familiarize yourself and check whether all the tools
have been removed from the machine before switch-
ing it on.
Keep the workplace clean. Crammed areas can lead
to accidents.
Keep children and visitors at a safe distance from the
work area.
Do not overload the machine. It works better and more
safely at the power for which it was designed.
Use the correct tool. Do not overstrain the tool or ac-
cessory. You get a better result with the correct tool or
accessory.
Wear suitable clothing: Loose clothing or gloves, ties,
rings, arm-bands or other ornaments can get entan-
gled in rotating components. Skid-free shoes are rec-
ommended. Protect long hair with a net.
Never lose your balance. Always remain secure with
both feet planted rmly on the ground.
Keep your machine in top condition. To achieve the
best and safest output, keep the tools sharp and clean.
Follow the instructions on lubrication and tool change.
Reduce the risk of unintended activation. Never work
at the machine under the inuence of drugs, alcohol or
medicaments.
Tile parts lying around can affect your health adverse-
ly. Operate the machine at well-ventilated places and
ensure effective waste disposal.
Warning! This electric tool generates an electromagnetic
eld during operation. This eld can impair active or pas-
sive medical implants under certain conditions. In order
to prevent the risk of serious or deadly injuries, we rec-
ommend that persons with medical implants consult with
their physician and the manufacturer of the medical im-
plant prior to operating the electric tool.
OTHER SAFETY INSTRUCTIONS
Please read all the instructions before using this product!
Workplace
To rule out the risk of physical injury, machine damage,
re and electric shock, please ensure that your work-
place is protected
against humidity, wetness and rain,
It is free of Inammable gases and liquids,
It is clean and empty,
It is well-ventilated and illuminated.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Starkwerk SW 4700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Starkwerk SW 4700 in the language / languages: English, German as an attachment in your email.

The manual is 4.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info