48143

Star LC-4511 Manual

46
Zoom out
Zoom in
Previous page
1/191
Next page
35
❏ Make sure the printer is on-line (ON LINE indicator is lit).
❏ Press SET/EJECT/PARK, to toggle between the Quiet Print Mode and normal
printing.
The printer emits one short beeps when the Quiet Print Mode is selected, and two
short beep when normal printing is selected.
Changing the auto load position
Normally the printer automatically feeds paper to a standard position (1/6-inch from
the top of the paper). This is called the auto load position. You can use the following
procedure to specify a different auto load position.
❏ Make sure the printer is off-line (ON LINE indicator is not lit).
❏ While holding down ON LINE, press SET/EJECT/PARK and then release the
two buttons.
The printer will automatically eject the cut-sheet that is in the printer, or reverse
feed fanfold paper until it is no longer in contact with the platen. Also, all the
font and pitch indicators on the control panel will light.
❏ Press SET/EJECT/PARK to feed the paper to the starting position.
❏ Feed the paper so the print head is located where you want the new auto load
position to be.
Press LINE FEED to feed the paper forward and FORM FEED to feed the
paper backward. This is the micro feed operation.
❏ After you have the paper at the position you want, hold down ON LINE and
press LINE FEED to make the current print head position the new auto load
position. The printer will beep twice to indicate that the new auto load position is
set.
❏ To clear the new auto load position and return to the one that you set previously
(using the above procedure), press ON LINE. To clear the currently set auto load
position and return to the standard position (1/6-inch from the top of the paper),
hold down ON LINE and press SET/EJECT/PARK.
Note:
The auto load position you set remains in effect until you turn the printer off. If you
want to save the auto load position in memory, press FORM FEED instead of LINE
FEED while holding down ON LINE in the above step.
❏ Assurez-vous que l’imprimante est en ligne (voyant ON LINE allumé).
❏ Appuyez sur SET/EJECT/PARK pour alterner entre le mode silencieux
d’impression et le mode normal.
L’imprimante émet un bip court lors de la sélection du mode silencieux d’impression
et deux bips courts lors de la sélection du mode normal d’impression.
Changement de la position de chargement automatique
Normalement, l’imprimante avance le papier en position standard (à 1/6 pouce du
haut du papier). Cette position est appelée la position de chargement automatique.
Vous pouvez changer cette position en effectuant les démarches suivantes.
❏ Assurez-vous que l’imprimante est hors ligne (voyant ON LINE éteint).
❏ Tout en tenant la touche ON LINE enfoncée, appuyez sur la touche SET/
EJECT/PARK, puis relâchez les deux touches.
L’imprimante éjecte automatiquement la feuille séparée qui se trouve dans
l’imprimante ou bien elle fait reculer le papier continu de sorte qu’il n’est plus
en contact avec le cylindre. Tous les voyants de police et de pas s’allument sur le
panneau de commande.
❏ Appuyez sur la touche SET/EJECT/PARK pour mettre le papier en position de
début d’impression.
❏ Avancez le papier pour mettre la tête d’impression à l’endroit qui doit devenir la
nouvelle position de chargement automatique.
Appuyez sur la touche LINE FEED pour faire avancer le papier ou sur la touche
FORM FEED pour le faire reculer. C’est la fonction d’avance par micro-lignes.
❏ Lorsque le papier est en position souhaitée, tenez la touche ON LINE enfoncée
et appuyez sur la touche LINE FEED pour que la position courante de la tête
d’impression devienne la nouvelle position de chargement automatique.
L’imprimante émet deux bips pour indiquer que la nouvelle position de
chargement automatique a été réglée.
❏ Pour annuler la nouvelle position de chargement automatique et revenir à la
position que vous aviez réglée auparavant (en suivant les démarches ci-dessus),
appuyez sur ON LINE. Pour annuler la position de chargement courante et
revenir à la position de chargement standard (à 1/6 pouce du haut du papier),
tenez la touche ON LINE enfoncée et appuyez sur SET/EJECT/PARK.
Remarque:
La position de chargement automatique réglée reste opérationnelle jusqu’à ce
qu’on éteigne l’imprimante. Si vous souhaitez mettre cette position en mémoire,
appuyez sur la touche FORM FEED au lieu de la touche LINE FEED tout en tenant
la touche ON LINE enfoncée à l’instruction ci-dessus.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Star LC-4511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Star LC-4511 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info