48143
30
Zoom out
Zoom in
Previous page
1/191
Next page
19
Printing on fanfold paper
When printing on fanfold paper, take care not to print
too close to the perforations that separate each sheet.
The following shows the recommended print area for
fanfold paper, cut-sheet paper and label paper.
Parking fanfold paper
It is not necessary to remove fanfold paper currently
loaded in the printer in order to print on cut-sheet
paper. Instead, simply use the following procedure to
park the fanfold paper.
Tear off the paper at a perforation so there is no
more than half a page sticking out of the front
cover of the printer.
If necessary, you can press the control panel’s
ON LINE button to put the printer off-line. and
then use the LINE FEED button to feed the paper
until a perforation is just past the front cover.
Press the control panel’s ON LINE button to put
the printer off-line.
Press the control panel’s SET/EJECT/PARK
button. The printer automatically reverse feeds
the fanfold paper until it is no longer in contact
with the platen, which is indicated by the printer
beeping a number of times. Also, the control
panel’s POWER indicator starts to flash because
paper is not loaded.
Move the release lever to the cut-sheet position.
Change the paper guide to its upright position.
You can now load cut-sheet paper into the printer
using the procedures under “Manual sheet
feeding” on page123.
5 mm
8 mm (0.31")
5 mm
4 mm (0.16")
(0.2")
(0.2")
2.54 mm (0.1") min.
6.35 mm
(0.25")min.
Label
C
C
C
C
C : 2.54 mm (0.1") min.
6.35 mm
(0.25")min.
Perforation
Cut-sheet paper
Feuilles séparées
Einzelblatt
Fogli singoli
Labels
Etiquettes
Etiketten
Etichette
4 mm (0.16")
18 mm
18 mm
(0.7")
25.4 mm (1")
(0.7")
25.4 mm (1")
25.4 mm (1")
Bottom of Form
Fin de la page
Unterer Druckrand
Fine della pagina
Perforation
Ligne prédécoupée
Perforation
Perforazione
110 mm (4.3")
25.4 mm (1")
First page
Première page
Erste Seite
Primo foglio
Last page
Dernière page
Letzte Seite
Ultimo foglio
Perforation
Ligne prédécoupée
Perforation
Perforazione
Fanfold paper
Papier continu
Endlospapier
Modulo continuo
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Star LC-4511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Star LC-4511 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info